Reference Guide
IMPORTANT: To use VNC Shadow, you must set
MaxVNCD=1 and dene a password; The MaxVNCD
default is 0 and this disables VNC. If you are using an
encrypted password, you must set encrypt to yes. For
example:
VncPassword=<encoded password> encrypt=yes
If you are using a plain text password, you must set
encrypt to no. For example:
VncPassword=<plain text> encrypt=no
See also MaxVNCD in Table 4: Connection Settings: wnos.ini
les only to enable VNC shadowing.
See also VNCPrompt in Table 7: Connection Settings:
wnos.ini les, {username} INI, and $MAC INI Files to enable a
VNC shadowing prompt to a user.
WarnUnlinkDisabled={yes, no}
Default is no.
Yes/no option to disable the pop-up warning message when a
network has no link for an ICA/RDP session.
WDAService=yes
[Priority ={WDM, CCM, “WDM;CCM”, “CCM;WDM”}]
WDA Service always runs in the background.If priority is available,
WDA discovers the protocol according to it.
There are only two protocols available now - WDM, and CCM. For
example, if priority=WDM; CCM, WDA tries to discover WDM
server and tries to check-in, and if it fails to check-in to WDM
server, it tries to check-in the device to CCM server.
WDMFlash=ash_size
The specied value will be saved into NVRAM, and then reports to
the WDM server. This statement ensures that all the units would
function with DDC regardless of ash size.
This statement is valid for all platforms and replaces the previous
S10 WDM Flash statement.
WDMService={yes, no}
[DHCPinform={no, yes}]
[DNSLookup={no, yes}]
[QuickMode={yes, no}]
[Discover={yes, no}]
[SecurityMode={default, full, warning, low}]
Default is yes.
WDMService — Yes/no option to disable the WDM agent.
Discovering the WDM server is supported by the following:
1 DNS host name lookup wdmserver
2 DNS service location record _wdmserver._tcp
3 DHCP option tag values received from standard or WDM
proxy DHCP service for vendor class RTIAgent
DHCPinform — Default is no. Yes/no option to use DHCP
information.
DNSLookup — Default is no. Yes/no option to use DNSLookup.
For Example: If WDMService=yes, setting DHCPinform=yes will do
number 3, setting DNSLookup=yes will do numbers 1 and 2.
If QuickMode=yes is specied, rapport agent will not block any
other process during ThinOS boot up, and boot time of ThinOS will
speed up.
38 Parameters for WNOS INI Files Only