Reference Guide

PictureOrder — Species the order of picture les to display. The
default is to use the order of sort from A to Z. If set to random,
pictures are displayed randomly.
PictureCheck — Species whether to check for picture les
servers or not.
NOTE:
If set to always, the picture les in le servers are checked
when the screen saver starts every time. By default, the
system checks for picture les only when the screen saver
starts for the rst time to decrease network trac.
PictureLayout— The optional parameteris used to specify the
arrangement on the desktop when pictures are displayed. For the
tile selection, the image is replicated across the desktop. For the
center selection, the image is placed at the center of the desktop
without any image size change. For the stretch selection, the image
is either expanded or shrinked to ll the desktop. The default value
is stretch.
Sleep—The optional parameter is used to specify the interval
minutes to stop soft screen saver and turn o monitor. After the
specied minutes, since software screen saver starts up, the
software screen saver is stopped and turns o the monitor until
screen saver is o. The value range is 0 to 180. The value 0 is
default which disables this function.
Shutdown={
standby, turno}
Default is standby.
Species the system state when shutting down the unit. If set to
standby, the ThinOS system is suspended. When the unit starts up,
it is resumed. It does not go to the BIOS and thus turns on quickly.
If set to turno, the system is turned o. When the unit starts up, it
rst starts the BIOS then ThinOS.
**ShutdownCount={0 to 60} (seconds)
or
**ShutdownCounter={0 to 60} (seconds)
ShutdownCount or ShutdownCounter — Species the number of
seconds to count down before the shutdown sequence starts upon
using the thin client power button when there are active sessions.
The default value is 10, however, to commence shutdown
immediately and prevent the display of the countdown dialog box,
set the value to 0.
ShutdownInfo={no, yes}
Yes/no option to display various information such as System
Version, Terminal Name, IP Address, and MAC Address in shutdown
window.
S10WDMFlash=ash size
Species the ash size. This value will be saved into NVRAM and
then eported to the WDM server.
NOTE:
This statement guarantees that all S10 thin clients function
with DDC regardless of ash size.
TimeServer=server_list
[TimeFormat={24-hour format, 12-hour format}]
[DateFormat={yyyy/mm/dd, mm/dd/yyyy, dd/mm/yyyy}]
TimeServer — Species the SNTP time servers to use for time
retrieval. If a time server is not dened, the client CMOS/BIOS
internal clock will be used as a reference.
TimeFormat — Default is24-hour format. Species the time
format to use.
Parameters for WNOS INI, {username} INI, and $MAC INI Files 53