Reference Guide

NOTE:
By default both the ICA and RDP protocols compress their
data to minimize the amount of data that needs to traverse
the network.
This compression can be as much as 50 percent for text-
based applications such as Microsoft Word and 40 percent
less for graphics applications than the uncompressed data
streams.
OneSignServer=onesign_server
[DisableBeep={no, yes}
[KioskMode={no, yes}]
[EnableFUS={no, yes}]
[TapToLock={0, 1, 2}]
[EnableWindowAuthentication={yes,no}]
[AutoAccess={VMW,XD,XA}]
[NetBIOSDomainName={no, yes}]
Species a list of host names or IP addresses with optional TCP
port number or URLs of Imprivata OneSign servers.
IMPORTANT: An https protocol must be used.
OneSign virtual desktop access oers a seamless authentication
experience and can be combined with single sign-on for no click
access to desktops and applications in a virtual desktop
environment.
The following inputs are acceptable values:
https://ip
or
https://FQDN
DisableBeep — Default is no. Yes/no option to set the Rdeas
reader to mute when a card is tapped.
KisokMode — Default is no. Yes/no option to allow the OneSign
user to share the client desktop.
EnableFUS — Default is no. Yes/no option to set the Citrix client
to remain running when switch users.
TaptoLock — Default is 2. Only active when KioskMode=yes.
Species tap to lock.
If TapToLock=0, then tap a card to lock terminal is disabled. If
TapToLock=1 (Tap to lock), then use the proximity card to lock the
terminal.
If TapToLock=2 (Tap over), then lock the terminal and log in a
dierent user.
EnableWindowAuthentication — Default is yes. Yes/no option to
sign-on with the user’s Windows credentials to pre-dened broker
if the OneSign sign-on fails.
AutoAccess — Species the corresponding type of broker to
automatically start. If not dened, the broker type is obtained from
the Imprivata Server setting of the computer and user policy. If
none of them is dened, then the rst available broker server from
the Imprivata server is started.
NOTE
:
AutoAccess can be set in [username].ini and wnos.ini,
however, the wnos.ini, has priority over [username].ini.
NetBIOSDomainName — Default is no. Yes/no option to enable
the authentication to the broker server using the NetBIOS domain
70
Parameters for WNOS INI, {username} INI, and $MAC INI Files