Reference Guide
name. If set to yes, the Imprivata domain list will show NetBIOS
domain name and the card user will authenticate to the broker
server using the NetBIOS domain.
PnliteServer=<List of {IP address, DNS names, or URLs} >
[ReconnectAtLogon={0, 1, 2}]
[ReconnectFromButton={0, 1, 2}]
[AutoConnectList={*/ appname1;appname2; appname3...}]
[timeout=5…300]
[CAGRSAAuthMethod={LDAP, RSA}]
[CAGAuthMethod={LDAP, RSA}]
[CAGAuthMethod={LDAP+RSA, RSA+LDAP}]
[RequestIconDataCount={0-65535}]
[DefaultSettings={XenApp, XenDesktop}]
[SmartcardPassthrough={yes, no}]
[StoreFront={no, yes}]
PnliteServer=List of {IP address, DNS names, or URLs}
PnliteServer — Species the list of IP addresses or host names
with optional TCP port number or URLs of PNAgent/PNLite
servers. The list is empty by default.
Each entry with optional port is specied as Name-or-IP:port,
where port is optional; if not specied, port 80 is used as the
default.
If a port other than 80 is used, the port number must be specied
explicitly with the server location in the form IP:port or name:port.
Once specied, it is saved in the non-volatile memory.
The statement PNAgentServer and Web interface for Citrix
MetaFrame Server is equal to this statement.
NOTE:
PnliteServer and the DomainList parameters can be used in a
{username}.ini le, but generally are used only in a wnos.ini
le.
The PNAgent/PNLite server list and associated domain list
optionally can be entered in DHCP server options 181 and
182, respectively. If entered in both places, the entries from
the Table 7: Connection Settings: wnos.ini les, {username}
INI, and $MAC INI Files will take precedence. However, the
{username}.ini le will override the wnos.ini le if the identical
parameters with dierent values exist in the {username}.ini
le.
NOTE:
When Multifarm=yes, use # to separate failover servers, and
use a comma (,) or a semicolon (;) to separate servers that
belong to dierent farms.
ReconnectAtLogon — Species the reconnection function at log
in.
Default is 0 — disables the option.
1 — reconnects to disconnected sessions only.
2 — reconnects to active and disconnected sessions.
ReconnectFromButton — Species the reconnection function
from the reconnect command button.
Default is 0 — disables the option.
1 — reconnects to disconnected sessions only.
2 — reconnects to active and disconnected sessions.
AutoConnectList — Species the PNA applications that will be
automatically started when using PNA to sign on. If
AutoConnectList=*, then all the PNA applications will be
automatically connected.
The autoconnectlist is the connection description of application or
host name which can use the wildcard * to match the string.
Parameters for WNOS INI, {username} INI, and $MAC INI Files
71