Reference Guide

MultiMonitor — Default is yes. Sets a multiple monitor layout. Set
MultiMonitor=no to disable multiple monitor layout function. The
session has the same desktop width and height with local virtual
desktop size, spanning across multiple monitors, if necessary.
EnableImprivataVC— Default is yes. If set to no, the Imprivata
Virtual Channel is disabled. The user can use vusb redirect instead
of Imprivata Virtual Channel mode to use the Rdeas or nger print
device in session as server side remote device.
[Locale=LocaleID]— Set Locale=LocaleID to set Locale in session
for localization conguration to work. For information about
LocaleID, refer to link msdn.microsoft.com/en-us/library/windows/
desktop/dd318693(v=vs.85).aspx.
SessionLogoTimeout—Setting SessionLogoTimeout value
forces all sessions to logo when user signs o from the broker.
The default value is 0 which retains the same behavior as before,
and also disconnects the sessions. If you set a value, for example
30 seconds, broker sign-o waits for 30 seconds for all sessions to
nish logo, then, automatically session logs o. Broker sign-o will
continue. During the waiting process, one notice prompts for user
to check whether the session stops working if something is not
saved. This feature currently supports Citrix Xen broker sessions
and View Broker sessions only.
GroupSession=yes— Set to enable the function of grouping
sessions and the menu item of Group Sessions is checked when
you right click on the desktop. The default value is no and the
original state of Group Sessions is unchecked.
**SessionCong=ICA
[desktopmode={fullscreen, window}]
[mapdisksunderz] : DISCONTINUED. DO NOT USE.
[TosIpPrecedence={0–5}]
[TosDscp={Default/CS1/CS2/CS3/CS4/CS5/CS6/CS7/AF11/
AF12/AF13/AF22/AF23/AF31/AF32/AF33/AF42/AF43}]
[DiskMapTo=a character sequence]
[SysMenu={remote, local}]
[SessionReliability={no, yes}]
[WarnPopup={yes, no}]
[ondesktop={no, yes, all, none, desktops, applications}]
[AudioQuality={default, high, medium, low}]
[USBRedirection={TCX, ICA|HDX}]
[ZLKeyboardMode={0, 1, 2}]
[ZLMouseMode={0, 1, 2}]
[SucConnTimeout=seconds]
[HDXFlashUseFlashRemoting={Never,Always}]
[HDXFlashEnableServerSideContentFetching={Disabled,Enabled}]
SessionCong
— Species the ICA default settings of the optional
connection parameters for all ICA sessions.
desktopmode — Default is fullscreen. Species the display mode
of an ICA published desktop when using an ICA PNAgent logon; the
default is fullscreen mode for a PNA desktop application.
mapdisksunderz — DISCONTINUED. DO NOT USE.
TosIpPrecedence — Allows you to set IP Precedence in the TOS
elds.
TosDscp — Sets IP DSCP in the TOS elds.
DiskMapTo — Species to map disks to a character sequence.
NOTE:
A sequence of characters can be used by DiskMapTo, with
each letter mapped to one disk in order. For example, if
RTNM is the sequence, R is mapped to the rst disk (in
ThinOS, it will be D:/), T is mapped to the second disk (in
ThinOS, it will be E:/), and so on. Only the letters “a” through
“y” and “A” through “Y” are accepted; All lowercase letters
are changed to uppercase, other characters will be skipped,
and duplicate characters will be omitted.
For example, #GGefZzedAF1JaE will be mapped to GEFDAJ.
The number of disks mapped to the session depends on the
number of valid letters provided. If no letter is provided, all
disks will be mapped to the session using default driver
letters.
Parameters for WNOS INI, {username} INI, and $MAC INI Files 77