Reference Guide
Gateway setting is automatically obtained or enabled from the
Microsoft RDS broker server.
TcpMaxRetransmission={2~12}
Congures the retransmission of a TCP connection. The default
value of this option is 5.
TerminalName=name
[reboot={yes, no}]
[Capital={yes, no}]
User can set a string up to 15 characters as terminal name. It can
be congured as system variable like $MAC, $SN or $IP etc.
If reboot is set to yes and the terminal name is changed, the
terminal will reboot.If "TerminalName=$DNS" is set, the system will
do reverse DNS lookup to congure the terminal name. For
example, if the DNS server congures the terminal IP as reverse
dns name p12345.wysespt.com, the terminal name will be
congured as p12345. If you set Capital=yes, the terminal name is
capitalized.
**UniSession={no, yes} Yes/no option to launch the connection only once at a time.
VDIBroker=vdi_broker_url
[AutoConnectList={*|host1;host2;host3…}]
VDIBroker — Species the VDI broker server; supports both http
and https.
If the vdi_broker_url does not start with http or https, the default
protocol used is http. For an https connection, only one URL is
accepted.
NOTE:
If the VDIBroker parameter value is changed, the thin client
will reboot without notice to the user so it can reconnect to
the new server.
AutoConnectList — Species the VDI or VDM host which will be
automatically started when using VDI or VDM sign-on. If the value
is *, all of the VDI or VDM hosts will automatically be connected.
The autoconnectlist is the connection description which can use
the wildcard * to match the string.
VirtualCenter=virtual_center_url
Species the Virtual Center Server that supports both http and
https. If the virtual_center_url does not start with http or https, the
default protocol used is http.
NOTE:
If a VirtualCenter in an INI le is dierent from the original
URL, the thin client will reboot for the new URL to take
eect.
Only this setting can enable the Virtual Center functions.
**VNCPrompt={no, yes}
[{Accept, Reject}={10 to 600} (seconds)]
[ViewOnly={no, yes}]
[ActiveVisible={no, yes}]
Default is yes.
VNCPrompt — Yes/no option to enable a VNC shadowing prompt
to a user. VNCPrompt set to yes means the user will always be
prompted before shadowing starts and the user will then decline or
accept VNC shadowing;
VNCPrompt set to no means the user will not be able to decline or
accept shadowing. See also MaxVNCD in Table 4 : Connection
Settings for wnos.ini les only to enable VNC shadowing.
See also VncPassword in Table 4: Connection Settings for wnos.ini
Files Only to specify a string of up to 8 characters as the password
used for shadowing.
Parameters for WNOS INI, {username} INI, and $MAC INI Files 81