Reference Guide

Command=start command
A string of commands to be executed after logging on to the
server. This entry is limited to 127 characters.
Description=string description
Connection description. Enclose the string description in quotation
marks if there are embedded blanks or single quotes. For quotation
marks, use common-practice nesting rules. Maximum of 38
characters are allowed.
Directory=working directory
A directory to be used as the working directory after logging on to
the server. Maximum of 63 characters are allowed.
Disablesound={no, yes, 2} or {0, 1, 2} Default is no.
Species whether or not to disable remote sound upon connection
start.
Domainname={domain name,$DN}
Domain name to use in a Windows network. $DN species that the
thin client sign-on domain name is used. Maximum of 19 characters
are allowed.
Encryption={None, Basic, 40, 56, 128, Login-128} Default is Basic.
Connection security encryption level. The highest level is 128-bit
security (Login-128 option is 128 bit encryption for login only).The
lowest is None.
NOTE:
The server must support the specied level of encryption or
the connection will fail.
Fullscreen={no, yes}
Default is no.
Yes/no option to run the session in full screen. If Fullscreen=no
then the session runs in a windowed screen.
Host=[name, IP, $SYS VAR]
or
Application=published application
Host — A list of server hostnames or IP addresses to which the
thin client will attempt to connect. The next server on the list is
attempted if the previous one failed. List items must be separated
by semicolons or commas.
NOTE:
$UN (see Table 1) species that the sign-on user name is
used and should be set in a {username}.ini le. If set to
Host=$UN in a {username}.ini le, the hostname will display
as the sign-on user name. If set to Host=$UN in a wnos.ini
le, the hostname will display as the default start.
Application — Denes the published application to launch.
Application is required if no host is specied.
HttpBrowsing={no, yes}
Default is no.
Yes/no option to select an http browsing protocol. Use
HttpBrowsing=no for User Datagram Protocol (UDP).
Connect Parameter: Options 85