Administrator Guide

e. Printer Class —(Optional) Select the printer class from the list.
f. Enable the printer device—Must be selected to enable the printer. It enables the device so it displays on the remote
host.
g. Enable LPD service for the printer—Select this to make the thin client an LPD (Line Printer Daemon) network print
server for LPR printing requests from the network, see Using Your Thin Client as a Print Server (LPD).
If the thin client is to be used as an LPD printer server, DHCP must not be used and a static IP address must be assigned
to the thin client as described in Configuring the Network Settings.
3. Click OK to save the settings.
Using the printer setup options
To configure the printer setup options:
1. From the desktop menu, click System Setup, and then click Printer.
The Printer Setup dialog box is displayed.
2. Click the Options tab, and use the following guidelines:
a.
Default Printer —Select the printer you want to be the default printer from your list of available printers.
b. Enable .print Client and Port —If you want to enable .print Client, select Enable .print Client , and then enter the
port.
3. Click OK to save the settings.
Using the Help
When you click the Help tab, the following message is displayed in the text box.
Printer Identification is supplied by printer device. Change it to a Window’s printer driver name or setup a driver mapping file.
Reset features
Reset features include:
● Resetting to factory defaults using G-Key reset
● Resetting to factory defaults using shutdown reset
● Resetting display settings using V-Key reset
128
Configuring thin client settings