Administrator Guide

NOTE:
● If there is no default password or if the password is changed, then you must set your password. For example,
[e-mail].
You can also reset the thin client to factory default settings. When you reset the thin client to factory default
settings, the anonymous user is configured with the default password. However, you need to reconfigure the thin
client.
● You can also use DHCP option tags 161 and 162 to configure the ThinOS client, file server and path information. You
must create these options on your DHCP server, configure them with the correct server information, and enable the
DHCP server scope in your environment.
8. Click OK.
9. Restart the thin client and wait until the auto-installation of packages is complete.
To verify that the thin client is upgraded, on the ThinOS desktop, navigate to System Information > General, and check the
System Version.
Firmware upgrade using HTTP or HTTPS
Ensure that you have set up a Windows PC or Server with Microsoft Internet Information Services (IIS) and HTTP or HTTPS
services installed. If you do not have the HTTP or HTTPS server installed, then refer to the article about how to setup an HTTP
or HTTPS server at support.microsoft.com.
Ensure that the web server can identify the file types used by ThinOS. Create two MIME types under IIS. The MIME's option
needs to be configured on a per site basis. On a default IIS, install:
1. Launch the IIS admin console.
2. Browse to the default website, right-click and select Properties.
3. Click the HTTP Headers tab, and in the MIME Map section, select File types > New Type.
4. Add the two MIME types. Use .INI and . for the associated extension fields.
5. Apply the settings and close the IIS admin console.
Installing IIS creates the default directory C:\inetpub\WWWroot, which is known as the WWW root. In the
WWWroot directory, create a folder WYSE and a sub folder wnos. The directory structure must read as C:
\inetpub\wwwroot\WYSE\wnos.
To upgrade the ThinOS firmware using HTTP or HTTPS server:
1. Go to www.dell.com/support.
2. Download the latest ThinOS firmware and latest ThinOS packages that corresponds to your thin client model. If the firmware
and packages are in the form of a compressed self-extracting (.EXE) or zipped file (.ZIP), then extract the files.
3. Place the extracted firmware files in the C:\inetpub\wwwroot\WYSE\wnos folder, and the packages to C:
\inetpub\wwwroot\WYSE\wnos\pkg on your HTTP or HTTPS server.
4. Create a wnos.ini text file (using a text editor) in the C:\inetpub\wwwroot\WYSE\wnos folder with the following INI
parameters:
Autoload=2 loadpkg=1 Addpkg=TCX,FR,horizon
The option Autoload=2, ensures that the thin client uses the firmware installed on the server to upgrade, only if the
firmware on the thin client is older than the version on the server. The option LoadPkg specifies how to update the external
packages. If LoadPkg is not in the statement, it will inherit the value of AutoLoad.
Base package and the PCoIP package are integrated into the ThinOS firmware image. Installing the latest ThinOS firmware
image automatically installs the latest version of these packages on the ThinOS client. If you set AutoLoad=1 LoadPkg=0,
the firmware is checked, but the packages are not checked. The packages check is performed after firmware check. From
ThinOS 8.3, the external packages update mechanism is changed. Some packages are default, and loaded according to value
of LoadPkg. For example RTME. Some packages need additional parameter AddPkg to add. For example, FR, Horizon, and
TCX. The option AddPkg is for adding packages. It depends on the value of LoadPkg. For more information about the INI
parameter usage, see Dell Wyse ThinOS INI Reference Guide.
5. Save the wnos.ini file.
6. On the ThinOS client desktop, navigate to System Setup > Central Configuration > General.
Firmware upgrade
173