Administrator Guide

no response is detected. WinPing sends one echo request per second, calculates round-trip times and packet loss statistics, and displays a
brief summary upon completion.
1 Click Start > Run.
2 Enter the WinPing in the Open box, and then click OK
The Dell Wyse WinPing dialog box is displayed.
a Enter a valid IP address in the IP address box.
b In the Retries box, type or select the number of echo requests you want to send out to the network lost.
c Click Ping.
WinPing sends one echo request per second, calculates round-trip times and packet loss statistics, and displays a brief summary
under the Status section on the dialog box upon completion.
Using the Net and Tracert Utilities
Net and Tracert utilities are available for administrative use, for example, to determine the route taken by packets across an IP network.
For more information on these utilities, go to www.microsoft.com.
Managing Users and Groups with User Accounts
Use the User Accounts window (Start > Control Panel > User Accounts) to create and manage user accounts, create and manage
groups, and congure advanced user prole properties. By default, a new user is only a member of the Users group and is not locked down.
As the administrator, you can select the attributes and prole settings for users.
This section provides quick-start guidelines on:
• Creating User Accounts
• Editing User Accounts
• Conguring User Proles
TIP
: For detailed information on using the User Accounts window, click the help icon and examples links provided throughout the
wizards. For example, you can use the Windows Help and Support window click the help icon in the User Accounts window to
search for items such as user proles and user groups and obtain links to detailed steps on creating and managing these items.
Creating User Accounts
Only administrators can create new user accounts locally or remotely through VNC. However, due to local ash/disk space constraints, the
number of additional users on the thin clientOptiplex client should be kept to a minimum.
NOTE
: To permanently save the information, be sure to disable the File Based Write Filter (FBWF).
1 Log in as an administrator.
2 On the Start menu, click Control Panel > User Accounts.
3 On the User Accounts window, click Manage another account.
The Manage Accounts window is displayed.
4 Click Create a new user account.
a If you want to create Standard account, select the standard user check box, and then enter the name in box.
b If you want to create Administrator account , select the administrator check box, and then enter the name in box.
c Click Create account.
Additional Administrator Utility and Settings Information
33