Deployment Guide

Table 6. Connection Settings: wnos.ini files only (continued)
Parameter Description
This is a vendor-specific information. If ParseVendorInfo is set
to no and the DHCPVendorID is also used with this parameter,
you must set ParseVendorInfo=yes and then reboot the thin
client twice.
Maximum of 26 characters are allowed in a string.
DisableDomain={no, yes}
Default is no.
Yes/no option to disable the drop-down domain list in the
PNAgent/PNLite Sign-on dialog box.
DNSIPVersion={ipv4, ipv6}
[DNSServer=server_list]
[DNSDomain=dns_domain_url]
[Combined={yes,
no}]
Specifies the DNS server and domain. Default IP version is
ipv4.
The DNS Server is an IP list separated by ; or ,.
The maximum size of this list is 16. For example:
10.200.5.53;192.168.100.1;192.168.200.8
NOTE: There is no space after the ;.
If Combined=yes, then the DNS server will combine the DNS
server configured by DHCP and the static one. DNS domain
will use the value configured by DHCP if static DNS domain is
empty.
DNSTTL={0-3600}
Specifies the Time to Live (TTL) of DNS name caching; the
default is from DNS server settings.
NOTE:
If DNSTTL=0, the DNS hostname in a connection always
queries the DNS server to get the IP.
DomainList=List of NT domain names
[disable={yes/no}]
A list of domain names that will appear in the thin client Sign-
on dialog box as options to help users in selecting the domain
to sign-on to PNAgent/PNLite servers. Once specified, it is
saved in non-volatile memory.
NOTE:
Be sure to enclose in quotation marks if spaces are
included. For example: DomainList=North_America, SQA,
test-domain.
disable— If the value is set to yes, the domain field in sign-on
window is disabled.
Dualhead={no, yes}
[ManualOverride={no, yes}]
[Mainscreen={1, 2}]
[Orientation={
hort, vert}]
[Align={Top|Left, Center, Bottom|Right}]
[Taskbar={wholescreen, mainscreen}]
[MonitorAutoDetect={yes,no}]
[Swap={
no, yes}]
[EnsureDpIsOn ={yes, no}]
Default is no.
Dualhead — Yes/no option to support a dual-monitor display.
Default no sets monitors to mirror mode; yes sets monitors to
span mode.
ManualOverride — Default is no. Yes/no option to allow the
local client to override display dualhead settings received from
central configuration.
If reset to factory defaults, it will once again take server
settings for dualhead. This is helpful for scenarios where you
have a mixture of dual head and single head deployments.
For example:
Parameters for wnos INI files only 23