Deployment Guide

Table 6. Connection Settings: wnos.ini files only (continued)
Parameter Description
If Connect parameters do not follow AccountSelfService=yes,
this password server will be the account self-service server of
Citrix and clicking the icon will use Citrix protocol to unlock or
change password for an account.
If Connect parameters follow AccountSelfService=yes,
clicking the icon launches a session to change password for
an account.
PCoIP_Logging={yes, no}
[Broker_Logging_Level={0,1,2,3,4}]
[Session_Logging_Level={0,1,2,3,4}]
The option PCoIP_Logging can enable and disable the PCoIP
client logs output in Trouble Shooting. If you set the value to
yes, then it is same as selecting the Trouble Shooting Capture
Export PCoIP Log radio button to persistent and no to none.
The option Broker_Logging_level and Session_Logging_Level
accord to PCoIP broker log level and PCoIP session log
level. The default value is 0 which means critical log, 1 means
log severity error, 2 means log severity info, 3 means log
severity debug, and 4 means log severity unrestrained.
PlatformConfig=all
[EncryptFS=yes]
Encrypts local flash, specifically cached INI files and
credentials that are stored, if using signon=yes.
NOTE:
Event log will display new statements stating that
FileSystem encryption has been enabled.
PlatformConfig=”C/V/S/R/T Class”
[Firmware={Firmware filename}]
[BIOS={BIOS filename}]
[ECFirmware={EC filename}]
If a specific platform is specified by the PlatformConfig
parameter, then ThinOS will attempt to load the Firmware and
BIOS whose filenames are specified by the Firmware and BIOS
parameters.
If the written Firmware and BIOS are valid on file server, they
will be loaded by default; if the written Firmware and BIOS
are invalid on file server, ThinOS will load the platform default
Firmware and BIOS instead.
For example: If you re-name the Wyse 3010 thin client
with ThinOS (T10) firmware file from DOVE_boot to
DOVE_boot_8.0_037., then you must use platformconfig-="T
Class", then add Firmware=DOVE_boot_8.0_037.
ThinOS will look on the file server for this exact firmware
name. If that defined firmware name is not found, then
ThinOS will fall back to the default logic and look for the
DOVE_boot firmware.
ECFirmware is only used for Wyse 3010 thin client with
ThinOS (T10)/X10J/X10CJ to update EC firmware, it is not
supported on other platforms.
C: C10LE V: VL10
S: S10 R: R10L
Wyse 3010 thin client with ThinOS (T10)
If the ECFirmware file name is not specified, device will look
for EC with default name: T10: T10_EC.bin
Proxy={yes,
no}
AppList={ccm;fr;rtme;wms}
[Type={Global, http, https, socks5}]
Specifies the proxy settings which are saved in non-volatile
memory. If Proxy=no, all proxy settings are cleared and all
the followed options are ignored.
30 Parameters for wnos INI files only