Deployment Guide

Table 6. Connection Settings: wnos.ini files only (continued)
Parameter Description
Discover— If Discover=yes is specified, rapport discovers
the WDM server information from DHCP option tag, DNS
service location record and DNS host name. If the WDM
server is discovered, the WDM server User Interface (UI) is
protected on the device. The default value is yes.
SecurityMode specifies the SSL certification validation
policy. If set to default, SecurityPolicy setting is applied.
If set to full, the SSL connection needs to verify server
certificate. If it is untrusted, drop the connection.
If set to warning, the SSL connection needs to verify server
certificate. If it is untrusted, it is up to you to continue or drop
the connection.
If set to low, the server certificate is not checked. The value is
persistent, and the default value of the setting is default.
If the settings are factory default or if you are upgrading to
ThinOS 8.3 for the first time, the value is temporarily set to
low. After loading any INI, it goes to Default value.
RapportServer=server_list
[Retry=]
NOTE:
DISCONTINUED. DO NOT USE. Use WDMServer
parameter, see WDMServer=<server_list> in Connection
Settings for wnos.ini Files Only.
Reboot | shutdown={no, yes} Time=hh:mm
[-hh:mm]
[Wday={Sunday, Monday, Tuesday, Wednesday, Thursday,
Friday, Saturday}]
[Idle=minutes]
Reboot — Yes/no option to enable automatic daily reboot of
all ThinOS devices.
Time — Specifies the time to reboot and must be in a 24-
hour format. For example: Reboot=Yes Time=17:30 will reboot
all ThinOS devices at 5:30 P.M. daily.
If you set time as hh:mm-hh:mm, a random time during the
configured time period is selected.
Wday— The option Wday specifies the week day of
scheduled reboot.
Idle— The option Idle specifies the idle minutes. After the
scheduled reboot time is reached, the unit reboots, if there is
no session or the terminal is idle for specified idle minutes. If
the session is still active, the reboot is delayed till the idle time
is reached or log off the sessions.
For example,
If you set Reboot=yes time=20:30, the unit reboots on local
time 20:30. If you set Reboot=yes time=20:30-4:30, the unit
reboots on random time through 20:30 to 4:30.
If you set Reboot=yes time=23:00 Wday=Friday,Monday, the
unit reboots on local time 23:00 of Friday and Monday.
If you set Reboot=yes time=1:00 Idle=10, the unit reboots on
1:00, if there are no sessions. If there is any active session, the
reboot happens only if the unit is idle for 10 minutes or the
system logs out from the session.
Since 8.3_012 or later, scheduling a shutdown at a given time
is supported. The options are same as schedule a reboot as
above.
For example, Set Shutdown=yes time=20:30, the unit shuts
down at local time 20:30.
32
Parameters for wnos INI files only