Deployment Guide

Table 6. Connection Settings: wnos.ini files only (continued)
Parameter Description
enrollment password from a Windows SCEP server. In this
case, the ScepUser, ScepUserDomain, ScepUserPwd (or
ScepUserPwdEnc, in encrypted form instead of plan-text)
are used to specify the SCEP administrator's credential,
and ScepAdminUrl must be set correctly to specify the
corresponding SCEP admin web page's URL. If neither
EnrollPwd nor EnrollPwdEnc is set, client will try to use
these set of settings to automatically get an enrollment
password and then use that password to request a certificate.
If communication security is necessary in your environment
during this phase, please add https:// as the prefix for
ScepAdminUrl to use HTTPS instead of the default HTTP
protocol.
Use ScepAutoEnroll=no AutoRenew=yes to only enable
SCEP auto renew; all other parameters are not needed if
ScepAutoEnroll is set to no.
NOTE: SCEP server’s URL must be an HTTP or HTTPS
link. Do not add protocol prefix to RequestURL and
ScepAdminURL.
SelectServerList={PNA, VDI}
[Default=default_desc]
list of servers {Server1; Server2; ...ServerN}
Allows users to select one PNA or VDI server during logon. For
server use the format:
description = <server’s description> host = <server’s
url> [ <options>]
NOTE: There must be “description” and “host” key words
on each server.
For PNA server options, use the options of the PnliteServer
parameter in Connection Settings: wnos.ini files, {username}
INI, and $MAC INI Files.
PNA example:
SelectServerList=PNA; Default=test3;
description = test1; host
= 192.168.0.10; autoconnectlist
=*; reconnectfrombutton=0; description
= test2; host = HostName2.wyse.com;
TimeOut=200; descriprion = test3 host =
https://server3.wyse.com
For a VDI server: If you want to use a VDI broker, specify
ConnectionBroker in wnos.ini. Otherwise the VDI broker’s type
is default.
VDI example:
ConnectionBroker=VDM SelectServerList=VDI;
Default=test5 description = test4; host =
192.168.0.11; description = test5; host =
host2.wyse.com
The Default option following "SelectServerList={PNA, VDI}"
can specify the default server. The value is one of server
description defined after that. After one selects another
server and sign off, this default server is selected. If default
option is not specified, the last selected server is selected in
the next sign on.
Service={snmpd, thinprint, vncd, wdm,
vda <port number>} disable={no, yes}
Service — Specifies the services you can enable or disable;
there are different syntaxes for the different services.
34 Parameters for wnos INI files only