Deployment Guide

Table 6. Connection Settings: wnos.ini files only (continued)
Parameter Description
Toolbardisablemouse — Default is no. Yes/no option to
disable the Zero toolbar from automatically displaying once
you pause the mouse pointer on the left side of the screen for
a specified amount of time.
toolbarclick — Default is no. Yes/no option to pop up the
toolbar only if clicking on the left-most side of the screen.
toolbardelay — Specifies the seconds to delay before
displaying the toolbar after pausing the mouse pointer on the
left-most side of the screen. The value 0 will have no delay.
The other values 1, 2, 3,4 will delay 0.5, 1, 1.5 and 2 seconds
respectively.
toolbar_no_conmgr — Default is no. Yes/no option to hide
the Home button.
toolbar_no_minimizeall — Default is no. Yes/no option to
hide the Home button thus affecting the ability to minimize
displayed list of connections.
toolbardisablehotkey — Default is no. Yes/no option to
disable the CTR+ALT+UP ARROW keyboard shortcut that
allows the toolbar to instantly display without a timer.
ToolbarEnableOneSession — Default is no. Yes/no option
to enable the toolbar when only one session is available.
ToolbarAutoQuit — Default is yes. ToolbarAutoQuit=no
prevents the sub-window from being closed. The toolbar will
auto-hide after a certain amount of time after user pause the
mouse pointer away from the toolbar.
ToolbarStay — ToolbarStay={1~20} controls the auto-hide
duration, 0.5s per value. Thus if ToolbarStay=1, the Toolbar
will auto-hide after 0.5 second; If ToolbarStay=10, the Toolbar
will auto-hide after 5 seconds.
EnableLogonMainMenu — Default is no. Yes/no option to
enable the main menu if you click the mouse button on the
desktop prior to logon in Zero mode.
SysName
NOTE: DISCONTINUED. DO NOT USE.
TcpTimeOut={1 , 2}
Default is 1.
Specifies the timeout value of a TCP connection. The number
of 30 seconds for the timeout value of a TCP connection. The
value must be 1 or 2 which means the connection timeout
value is from 1x30= 30 seconds to 2x30= 60 seconds.
Values of 3-255 are recognized only for backwards
compatibility that is >2 = 60 seconds, however, these values
should not be used and the value should be set to 2.
TCXLicense
NOTE: DISCONTINUED. DO NOT USE.
VncPassword=<password>
[encrypt={no, yes}]
VncPassword — Specifies a string of up to 8 characters as
the password used for shadowing.
encrypt — Default is no. Yes/no option to set according to
whether or not the vncpassword you are using is encrypted.
NOTE: To use VNC Shadow, you must set MaxVNCD=1
and define a password; The MaxVNCD default is
0 and this disables VNC. If you are using an
40 Parameters for wnos INI files only