Deployment Guide

Table 9. Connection Settings: wnos.ini files, {username} INI, and $MAC INI files (continued)
Parameter
* Global overrides identically-named user profile
** After sign off, user profile returns to global value
Description
eap=yes eaptype=EAP-PEAP peapeap=EAP-
MSCHAPV2
Device=Wireless Mode=Infrastructure
SSID=wtos_11n
IEEE8021X=yes network=wireless
profile=wtos_11n access=WPA2-PSK
wpa2pskpwd=2wsx3edc
Device=Wireless
Priority="wtos_11n,wtos_95,ThinIsIn"
RoamScanChannelTime allows you to set the time the
thinclient stays on one channel for scanning the surrounding
aps. The default value is 2.
The RoamScanChannelTime sets the time 10 times the
provided value. The time ranges from 10ms to 150ms.
For example, if you set RoamScanChannelTime=10, the thin
client stays on one channel for 100ms.
If you do not set the value or if the value is out of range, the
thin client reverts to the default value 2.
RoamScanChannelProbes allows you to set the number of
probes the thin client sends out on a channel. The default
value is 4.
This value ranges from 1 to 4.
If you do not set the value or if the value is out of range, the
number of probe is reverted to the default value 4.
DISABLETSGW
NOTE: DISCONTINUED. DO NOT USE. See
TSGWENABLE
**EnableLocal={no, yes}
[HideDefault={no, yes}]
Default is no.
Yes/no option to enable locally configured entries to show
in the Connect Manager list. When connections defined in
local NV-RAM are displayed in the Connect Manager, they are
marked with an asterisk.
If EnableLocal=yes is in a wnos.ini file, then the global
information will be saved into NVRAM.
NOTE: The global information includes: SEAMLESS,
ALTERNATE, Reconnect, icaBrowsing, LowBand,
NoReducer, Time settings, and Printer settings in a
wnos.ini file.
HideDefault — Default is no. Yes/no option to hide the
default ICA and RDP connections that are present on the
devices.
ENABLETSGWSAMEINFO
NOTE: DISCONTINUED. DO NOT USE.
*EthernetSpeed={Auto, 10M HD, 10M FD, 100M HD, 100M
FD, 1000M}
Default is auto.
EthernetSpeed — Specifies the Ethernet Speed to either
Auto, 10M HD, 10M FD, 100M HD, or 100M FD. Once
specified, it is saved in the non-volatile memory. This
parameter can be replaced by the Device and Speed
parameters.
Parameters for wnos INI, {username} INI, and $MAC INI files 71