Deployment Guide

Table 9. Connection Settings: wnos.ini files, {username} INI, and $MAC INI files (continued)
Parameter
* Global overrides identically-named user profile
** After sign off, user profile returns to global value
Description
ReconnectAtLogon — Specifies the reconnection function
at log in.
Default is 0 — disables the option.
1 — reconnects to disconnected sessions only.
2 — reconnects to active and disconnected sessions.
ReconnectFromButton — Specifies the reconnection
function from the reconnect command button.
Default is 0 — disables the option.
1 — reconnects to disconnected sessions only.
2 — reconnects to active and disconnected sessions.
AutoConnectList — Specifies the PNA applications that
will be automatically started when using PNA to sign on.
If AutoConnectList=*, then all the PNA applications will be
automatically connected.
The autoconnectlist is the connection description of
application or host name which can use the wildcard * to
match the string.
NOTE: Appname values are case sensitive.
Timeout — Specifies the time in seconds where a client
will try to establish a connection before reporting that it is
unreachable.
CAGRSAAuthMethod or CAGAuthMethod —
CAGAuthMethod option is used for CAG authentication
configuration.
NOTE:
This option replaces CAGRSAAuthMethod. If
CAGAuthMethod=RSA which is same as the prior
CAGRSAAuthMethod=RSASecurid, an extra passcode
field needs to be input except username/password/
domain. If CAGAuthMethod=LDAP, no passcode field is
needed.
●
CAGAuthMethod={LDAP+RSA, RSA+LDAP} — Used for
CAG authentication configuration.
● If CAGAuthMethod = LDAP+RSA, an extra passcode field
needs to be input except username/password/domain. If
the CAG server is configured for a double authentication
policy, this ini corresponds to the first auth LDAP and
second auth RSA.
● If CAGAuthMethod = RSA+LDAP, it has the same result
with CAGAuthMethod = RSA, compared to LDAP+RSA. If
CAG server configure double authentication policy, this ini
correspond to First auth RSA and Second auth LDAP.
RequestIconDataCount — RequestIconDataCount is used
for requesting 32-bit color icons. It is a counter which means
that only the count of the icons will be requested. The default
number is 10.
Parameters for wnos INI, {username} INI, and $MAC INI files
79