Deployment Guide

Table 9. Connection Settings: wnos.ini files, {username} INI, and $MAC INI files (continued)
Parameter
* Global overrides identically-named user profile
** After sign off, user profile returns to global value
Description
devices are redirected to the server using TCX Virtual USB
or ICA or RDP USB redirection. In addition, by default, these
devices are set as local devices.
NOTE: For example, if you want to use USB disks as a
network disk, you can set SessionConfig=all mapdisks=yes
VUSB_DISKS=no.
If you want to use USB disks as server side
device, you can set SessionConfig=all mapdisks=no
VUSB_DISKS=yes. The devices are displayed in device
manager of the session.
FullScreen — Default is no. Specifies the default screen
mode. When using FullScreen in a Dual Screen mode, the
session will be displayed in Span mode
Resolution — Default is default. Specifies the session
resolution. For example, 640 x 480 and other supported
resolutions.
Default will set the resolution to the native resolution of the
monitor. Setting the resolution to a value smaller than the
native resolution of the monitor, will allow the session in
Windowed mode. The resolution value cannot be higher than
the native resolution.
DisableResetVM — Default is no. Set DisableResetVM=yes
to disable Reset VM function. As default, this function is
controlled by the server side is enabled including VMware
View or Citrix PNA.
WyseVDAServerPort — Sets Wyse VDA Server Port
for a ThinOS VDA client. The default port is 3471. The
port range must be from 1029 to 40000. For example,
WyseVDAServerPort=3000, sets VDA server port to 3000 and
the client will connect to the VDA server using this port.
FontSmoothing — Default is yes. Set no to disable font
smoothing.
AutoConnect — Default is yes. Set no to disable auto
connect function.
MultiMonitor — Default is yes. Sets a multiple monitor
layout. Set MultiMonitor=no to disable multiple monitor layout
function. The session has the same desktop width and
height with local virtual desktop size, spanning across multiple
monitors, if necessary.
EnableImprivataVC— Default is yes. If set to no, the
Imprivata Virtual Channel is disabled. The user can use vusb
redirect instead of Imprivata Virtual Channel mode to use the
Rfideas or finger print device in session as server side remote
device.
[Locale=LocaleID]— Set Locale=LocaleID to set Locale in
session for localization configuration to work. For information
about LocaleID, refer to link msdn.microsoft.com/en-us/
library/windows/desktop/dd318693(v=vs.85).aspx.
SessionLogoffTimeout—Setting SessionLogoffTimeout
value forces all sessions to logoff when user signs off from
Parameters for wnos INI, {username} INI, and $MAC INI files
85