Reference Guide
Parameter Description
environment during this phase, please add https:// as the prex for
ScepAdminUrl to use HTTPS instead of the default HTTP protocol.
Use ScepAutoEnroll=no AutoRenew=yes to only enable SCEP auto
renew; all other parameters are not needed if ScepAutoEnroll is set
to no.
NOTE: SCEP server’s URL must be an HTTP or HTTPS
link. Do not add protocol prex to RequestURL and
ScepAdminURL.
SelectServerList={PNA, VDI}
[Default=default_desc]
list of servers {Server1; Server2; ...ServerN}
Allows users to select one PNA or VDI server during logon. For
server use the format:
description = <server’s description> host = <server’s
url> [ <options>]
NOTE: There must be “description” and “host” key words
on each server.
For PNA server options, use the options of the PnliteServer
parameter in Connection Settings: wnos.ini les, {username} INI,
and $MAC INI Files.
PNA example:
SelectServerList=PNA; Default=test3;
description = test1; host =
192.168.0.10; autoconnectlist
=*; reconnectfrombutton=0; description = test2;
host = HostName2.wyse.com; TimeOut=200;
descriprion = test3 host =
https://
server3.wyse.com
For a VDI server: If you want to use a VDI broker, specify
ConnectionBroker in wnos.ini. Otherwise the VDI broker’s type is
default.
VDI example:
ConnectionBroker=VDM SelectServerList=VDI;
Default=test5 description = test4; host =
192.168.0.11; description = test5; host =
host2.wyse.com
The Default option following "SelectServerList={PNA, VDI}" can
specify the default server. The value is one of server description
dened after that. After one selects another server and sign o,
this default server is selected. If default option is not specied, the
last selected server is selected in the next sign on.
Service={snmpd, thinprint, vncd, wdm,
vda <port number>} disable={no, yes}
Service — Species the services you can enable or disable; there
are dierent syntaxes for the dierent services.
disable — Default is no. Yes/no option to disable the services.
Disable must follow the Service parameter.
Service=snmpd disable={no, yes}
[community=<snmp_community> [encrypt={yes, no}]]
[communityReadOnly=<snmp_community_read_only>
[encrypt={yes, no}]]
Default is no.
Service=snmpd disable — Yes/no option to disable the snmpd
service.
community — The option community is same as the statement
Community. encrypt option is same as that in the statement
community.
34 Parameters for wnos INI les only