Reference Guide

Parameter Description
Encrypt—This option species whether or not the password is encrypted. For
example, ResourceUrl=yes type=picture url=ftp://10.xxx.xxx.xx/pic1 user=pteng
password=xxxxxx encrypt=no
**ScreenSaver=value{0, 1, 3, 5, 10, 15, 30}
[LockTerminal={0, 1, 2, 3}]
[Type={0, 1, 2, 3, 4}]
[VideoLink=httplink]
[VideoSpan=no]
[Unit=hour]
[Image=imagele]
[PictureTimer={2-60}]
[PictureOrder=random]
[PictureCheck=always]
[PictureLayout={stretch, tile, center}]
[Sleep={0-180}]
Screensaver— Species to put the thin client in a screensaver state when the time
limit for inactivity is reached, that is delay before starting is reached.
Default value is 10. Value and delay before starting the screensaver:
0 — Disabled
1 — 1 Minute
3- 3 Minutes
5 — 5 Minutes
10 — 10 Minutes
15 — 15 Minutes
30 — 30 Minutes
The default screen saver value is 10 minutes and the maximum value is 180 minutes. If
the value is not specied in the table, it is added to the drop down list in the GUI.
LockTerminal— This is an optional parameter and species to put the thin client in
LOCK state when the screen saver is activated. Default is 0.
0 — Disabled.
1 — Puts the thin client in a LOCK state when the screen saver is activated. The
wallpaper is shown and the user is prompted with an unlock dialog box to enter the
sign-on password to unlock the thin client. LockTerminal settings are saved into
NVRAM if LockTerminal=1and EnableLocal=yes is set in the wnos.ini le.
2— Puts the thin client in a LOCK state when the screen saver is activated, however,
the wall paper cannot be viewed when the user is prompted with an unlock dialog box
to enter the sign-on password to unlock the thin client.
3— Puts the thin client in a LOCK state when the screen saver is activated, and the
username and password are needed to unlock the terminal. The wallpaper is not shown
and the Password eld in the Unlocking window is invisible until you have entered the
username.
When you click OK or press the Return key, a message box pops up to input the
username and password to unlock the terminal.
NOTE
:
The user must be signed on with a password for a Lock action to take eect. If
set in KeySequence, users can lock the thin client at any time by pressing Ctrl
+Alt+Left arrow or Ctrl+Alt+Right arrow.
Unit — This parameter converts the screen saver timer value from minutes to hours
to set longer time.
Type — Species which type of screensaver to use.
0 — Blank the Screen
1 — Flying Bubbles
2 — Moving Image
58
Parameters for wnos INI, {username} INI, and $MAC INI les