Reference Guide
Parameter
* Global overrides identically-named user prole
** After sign o, user prole returns to global value
Description
Always use pnliteserver to continue. When the value is set to no,
the Netscaler server is used as default gateway to reset the login
again. The default value is no.
CAGUserAsUPN—This value allows the client to send username to
server in the format username@fqdn, similar to an email address.
Third party authentication for Netscaler uses this format. Example:
Okta authentication.
CAGExternal—This value allows CAG login with external network
mode directly without check beacons and reduces login time.
DisableSFInit—This value disables storefront initialization process
when you turn on the thin client. This is because, the storefront
initialization process takes time to start which is not required during
logon.
RTPTosDscp={Default/CS1/CS2/CS3/CS4/CS5/CS6/CS7/AF11/
AF12/AF13/AF22/AF23/AF31/AF32/AF33/AF42/AF43/EF}
Sets RTP/UDP audio channel in the TOS elds.
SaveSysinfo={usb, _proto_, _full_url_}
[ScardLog=0xF ]
[Username=_username_]
[Password=_password_]
[Size=_le_length_limit]
[Append={yes, no}]
Congure the target clients to save the event logs.
full_url—If set as a specied full url name, it is saved into the
specied url. Otherwise, it is saved as a le name, such as /wnos/
troubleshoot/{TERMNAME}_LOG_{DATE}_{TIME}.txt.
usb—If set to usb, it is saved into the last mounted USB disk.
proto—If set to a protocol, for example, ftp, http or https, it is
saved into the le server with this protocol.
Scardlog—The Smart card Log option is a bit mask to control the
following logs:
• 0x1 Context log
• 0x2 Handle log
• 0x4 Status log
• 0x8 Transfer log
Username and Password—The options specify the account of the
le server or url. If not set, the default account of le server is
used.
Size—This option species the le size limitation. When the le is
greater than the specied size, the le will be cleared.
Append—This option appends the event log to the same le name
instead of creating a new le. It is only valid for full url with ftp. The
protocol http or https is also supported from 8.4.1 release.
For example, savesysinfo=http://10.151.121.3/wnos/
yyy.txt username=administrator password=wyseatc
append=yes Size=4000
.
The event log le yyy.txt is appended in every boot-up. If the le
size is up to 4000 bytes, then the le is cleared and continues to
save the log.
**Seamless={
no, yes} Seamless — Default is no. Yes/no option to set the default
resolution for ICA published applications to Seamless for ICA
connection parameters.
82 Parameters for wnos INI, {username} INI, and $MAC INI les