Reference Guide

Parameter
* Global overrides identically-named user prole
** After sign o, user prole returns to global value
Description
Default will set the resolution to the native resolution of the
monitor. Setting the resolution to a value smaller than the native
resolution of the monitor, will allow the session in Windowed mode.
The resolution value cannot be higher than the native resolution.
DisableResetVM — Default is no. Set DisableResetVM=yes to
disable Reset VM function. As default, this function is controlled by
the server side is enabled including VMware View or Citrix PNA.
WyseVDAServerPort — Sets Wyse VDA Server Port for a ThinOS
VDA client. The default port is 3471. The port range must be from
1029 to 40000. For example, WyseVDAServerPort=3000, sets VDA
server port to 3000 and the client will connect to the VDA server
using this port.
FontSmoothing — Default is yes. Set no to disable font
smoothing.
AutoConnect — Default is yes. Set no to disable auto connect
function.
MultiMonitor — Default is yes. Sets a multiple monitor layout. Set
MultiMonitor=no to disable multiple monitor layout function. The
session has the same desktop width and height with local virtual
desktop size, spanning across multiple monitors, if necessary.
EnableImprivataVC— Default is yes. If set to no, the Imprivata
Virtual Channel is disabled. The user can use vusb redirect instead
of Imprivata Virtual Channel mode to use the Rdeas or nger print
device in session as server side remote device.
[Locale=LocaleID]— Set Locale=LocaleID to set Locale in session
for localization conguration to work. For information about
LocaleID, refer to link msdn.microsoft.com/en-us/library/windows/
desktop/dd318693(v=vs.85).aspx.
SessionLogoTimeout—Setting SessionLogoTimeout value
forces all sessions to logo when user signs o from the broker.
The default value is 0 which retains the same behavior as before,
and also disconnects the sessions. If you set a value, for example
30 seconds, broker sign-o waits for 30 seconds for all sessions to
nish logo, then, automatically session logs o. Broker sign-o will
continue. During the waiting process, one notice prompts for user
to check whether the session stops working if something is not
saved. This feature currently supports Citrix Xen broker sessions
and View Broker sessions only.
GroupSession=yes—Set to enable the function of grouping
sessions and the menu item of Group Sessions is checked when
you right click on the desktop. The default value is no and the
original state of Group Sessions is unchecked.
SessionCong=ICA
[desktopmode={fullscreen, window}]
[mapdisksunderz]: DISCONTINUED. DO NOT USE.
[TosIpPrecedence={0–5}]
[TosDscp={Default/CS1/CS2/CS3/CS4/CS5/CS6/CS7/AF11/
AF12/AF13/AF22/AF23/AF31/AF32/AF33/AF42/AF43/EF}]
SessionCong — Species the ICA default settings of the optional
connection parameters for all ICA sessions.
desktopmode — Default is fullscreen. Species the display mode
of an ICA published desktop when using an ICA PNAgent logon; the
default is fullscreen mode for a PNA desktop application.
mapdisksunderz — DISCONTINUED. DO NOT USE.
TosIpPrecedence — Allows you to set IP Precedence in the TOS
elds.
86 Parameters for wnos INI, {username} INI, and $MAC INI les