Setup Guide
NOTE:
The le name does not include the symbol : in the mac
address. See also the Exit parameter for information on how
to terminate Include. <{username}.ini> Loads /wnos/inc/
{username}-address.ini.
The le name does not include the symbol : in the
{username} address. See also the Exit parameter for
information on how to terminate Include.
MirrorFileServer={no, yes}
Default is no.
Yes/no option to enable the cache all server les functionality. This
enables the cache all server les such as INI les, wallpaper, bitmap,
font, local messages and so on to the local ash when les are
changed in the le server. ThinOS would use the cached les when
les on the le server are unavailable.
IMPORTANT: S10 is not supported
RootPath=<le server root path>
This le server root path is entered into thin client local setup (non-
volatile memory). The thin client immediately uses this path to
access les. The directory name \wnos will be appended to the le
server root path entry before use.
TerminalName=<name>
[reboot={no, yes}]
TerminalName — Name of the client comprising a 15-character
string. It can also be congured with system variables. Basically all
the variables can be used except $TN (recursive), $UN, $PW, $DN.
However, these are not yet available when parsing wnos.ini.
Additionally combinations like xy$mac, sz$tnxyz etc are supported.
reboot — Default is no. Yes/no option to reboot the thin client if
the terminal name is changed.
TimeZone=<zone value>
[ManualOverride={no, yes}]
[daylight={no, yes}]
[start=MMWWDD end=MMWWDD]
[TimeZoneName=<timezonename>]
[DayLightName=<daylightname>]
TimeZone — Species the time zone if the zone is unspecied on
the thin client or is used with ManualOverride. Supported zone
values s are listed in the System Preference dialog box on the thin
client and in TimeZone Parameter: Values.
NOTE:
The TimeZone parameter is dependent on the
TimeServer=parameter. If a time server is not dened, the
client CMOS/BIOS internal clock will be used as a reference.
ManualOverride — Default is no. Yes/no option to override the
thin client System Preference Menu setting with this TimeZone
setting. TimeZone settings in the wnos.ini le will be saved into
NVRAM if EnableLocal=yes is set in the wnos.ini le.
Daylight — Default is no. Yes/no option to enable daylight saving
time; MMWWDD is a 6 digit number to specify the start and the
end of daylight saving time.
18 Parameters for wnos INI les only