Setup Guide
[WDMServer={128 to 254}]
[WDMPort={128 to 254}]
[PnliteServer={128 to 254}]
[DomainList={128 to 254}]
[VDIBroker-{248 to 254}]
[RapportSecurePort={128-254}]
[Discover={yes, no}]
[WDMSecurePort={128 to 254}]
[WDMFQDN={128-254}]
[CCMGroupKey={128-254}]
[CCMServer={128-254}]
[CCMMQTTServer={128-254}]
[CCMCAValidation={128-254}]
If you set dierent value for DisableOption12 from the value in
NVRAM, the system will automatically reboot to make the value
valid. (CIR36891)
RapportSecurePort— Species the HTTPS port of WDM server.
It is in 6.3 to support WDM4.7.
Discover—If Discover=yes, the device fetches Wyse DHCP
options from DHCP server, otherwise, it prevents the device from
fetching those information. Default value is yes. If the device
receives FileServer/WDMServer information through the DHCP
server, then the associate User interface is protected.
NOTE:
WDMSecurePort is the specied HTTPS port of the WDM
server.
WDMServer—Value 186 species the IP address of WDM server.
Value 192 species the HTTP port of WDM server.
WDMSecurePort—Species the HTTPS port of WDM server.
WDMFQDN — Species the Fully Qualied Domain Name (FQDN)
of the WDM server.
NOTE: The CCMGroupKey, CCMServer,
CCMMQTTServer and CCMCAValidation options are
specied to remap the tags for CCM conguration.
DHCPUserClassID=class_id
[ParseVendorInfo={no, yes}]
DHCPUserClassID — Species the UserClassID used for DHCP.
ParseVendorInfo — Default is yes. Yes/no option to specify
whether or not ThinOS will interpret DHCP option 43.
This is a vendor-specic information. If ParseVendorInfo is set to no
and the DHCPVendorID is also used with this parameter, you must
set ParseVendorInfo=yes and then reboot the thin client twice.
Maximum of 26 characters are allowed in a string.
DHCPVendorID=vendor
[ParseVendorInfo={no, yes}]
DHCPVendorID — Species the VendorID used for DHCP.
ParseVendorInfo — Default is yes. Yes/no option to specify
whether or not ThinOS will interpret DHCP option 43.
This is a vendor-specic information. If ParseVendorInfo is set to no
and the DHCPVendorID is also used with this parameter, you must
set ParseVendorInfo=yes and then reboot the thin client twice.
Maximum of 26 characters are allowed in a string.
DisableDomain={no, yes}
Default is no.
Yes/no option to disable the drop-down domain list in the
PNAgent/PNLite Sign-on dialog box.
DNSIPVersion={ipv4, ipv6}
[DNSServer=server_list]
[DNSDomain=dns_domain_url]
[Combined={yes,no}]
Species the DNS server and domain. Default IP version is ipv4.
The DNS Server is an IP list separated by ; or ,. The maximum size
of this list is 16. For example: 10.200.5.53;192.168.100.1;192.168.200.8
IMPORTANT: There is no space after the ;.
24 Parameters for wnos INI les only