Setup Guide

INACTIVE=minutes
[NoSessionTimer=minutes]
[LockTimer=seconds]
Default is 0. There is no Idle timeout. The range is 0 minutes to 480
minutes.If the value given is bigger than 480, 480 is set instead. If
the value given is smaller than 0, 0 is set instead.
When the system idle is time out in the congured minutes, the
system will automatically sign o, reboot or shutdown which are
based on the setting of AutoSigno.
NoSessionTimer— The parameter NoSessionTimer has the same
range as INACTIVE and it is valid only if INACTIVE value is not 0. If
there is a session use the value of Inactive, otherwise use the value
of NoSessionTimer, if NoSessionTimer is congured.
If AutoSigno=yes Shutdown=yes is congured, then this
statement can work before signon.
If AutoSigno=yes Reboot=yes is congured, this statement can
work before signon.
LockTimer—If the parameter LockTimer is set, the terminal is
locked and the system idle is timeout in the congured seconds;
System will automatically sign o, reboot or shutdown based on the
setting of AutoSigno.
LongApplicationName={no, yes}
Default is no.
Yes/no option to display all 38 characters in a desktop icon name. If
LongApplicationName=no, then icons will display up to 19
characters; any over 19 characters and the last three characters will
be “…”.
MaxVNCD={0, 1}
[VNCD_8bits={yes,no}]
[VNCD_Zlib={yes, no}]
Default is 0.
Option to enable VNC shadowing. Default value is 0 means VNC
shadowing is disabled. Set to 1 to enable shadowing.
NOTE:
Only one VNC client session is allowed and a password is
required.
See also VNCPrompt in Connection Settings: wnos.ini les,
{username} INI, and $MAC INI Files to enable a VNC shadowing
prompt to a user.
See also VncPassword in Connection Settings: wnos.ini les only to
specify a string of up to 8 characters as the password used for
shadowing.
VNCD_8bits — Default is yes. Yes/no option to force the VNC
server to send out images with 8-bits-per-pixel; if set to no, the
VNC server will send out images with the current system color
depth.
VNCD_Zlib — Default is no. Yes/no option to allow the VNC server
to send data with Zlib compression.
MMRCong={VIDEO}
[ashingHW={0, 1}]
This parameter species whether to show the “HW” label at the
top left corner of video or not when HDX is hardware decoded. The
default value is 0. Set ashingHW to 0, if you want to hide HW. Set
ashingHW to 1, if you want to show HW.
Multifarm={no, yes}
Default is no.
28 Parameters for wnos INI les only