Setup Guide

[PreferBand={None, 2.4G, 5G}]
[Priority=ssid_list]
[DisableN={no, yes}]
[DisableWlan={yes, no, EnetUp}]
Algorithm — Species the authentication method of WEP
between ThinOS and the access point. If set to Open, open
authentication will be selected. If set to ShareKey, shared key
authentication will be selected.
DisableBand — Default is None. Use to disable 2.4G or 5G 802.11
band.
PreferBand —This parameter is used to set the priority of wireless
connection band, and select the 2.4G or 5G access point to
connect. Default is None.
Priority — sets the priority of wireless proles. The ssid list is
separated by a semicolon or comma and the priority is from high to
low.
DisableN — Default is no. Yes/no option to disable 802.11n Wi-Fi
wireless networking.
DisableWlan— Used to disable the wireless connection. If
DisableWlan=EnetUp, and the Ethernet is on while booting, the
wireless connection is disabled.
Device=Wireless Mode=Infrastructure
SSID=ThinIsIn
IEEE8021X=yes network=wireless
profile=ThinIsIn access=WPA2-ENT
eap=yes eaptype=EAP-PEAP peapeap=EAP-MSCHAPV2
Device=Wireless Mode=Infrastructure
SSID=wtos_95 roamsensitive=high
IEEE8021X=yes network=wireless profile=wtos_95
access=WPA2-ENT
eap=yes eaptype=EAP-PEAP peapeap=EAP-MSCHAPV2
Device=Wireless Mode=Infrastructure
SSID=wtos_11n
IEEE8021X=yes network=wireless
profile=wtos_11n access=WPA2-PSK
wpa2pskpwd=2wsx3edc
Device=Wireless
Priority="wtos_11n,wtos_95,ThinIsIn"
DISABLETSGW
IMPORTANT: DISCONTINUED. DO NOT USE. See
TSGWENABLE
**EnableLocal={no, yes}
[HideDefault={no, yes}]
Default is no.
Yes/no option to enable locally congured entries to show in the
Connect Manager list. When connections dened in local NV-RAM
are displayed in the Connect Manager, they are marked with an
asterisk.
If EnableLocal=yes is in a wnos.ini le, then the global information
will be saved into NVRAM.
NOTE: The global information includes: SEAMLESS,
ALTERNATE, Reconnect, icaBrowsing, LowBand,
NoReducer, Time settings, and Printer settings in a
wnos.ini le.
HideDefault — Default is no. Yes/no option to hide the default ICA
and RDP connections that are present on the devices.
ENABLETSGWSAMEINFO
IMPORTANT: DISCONTINUED. DO NOT USE.
Parameters for wnos INI, {username} INI, and $MAC INI les 71