Setup Guide
NOTE:
Any option in RDP Connect Options that is used in a {username}.ini le will return to the default value set for that option in the wnos.ini
le after a user sign-o.
For example, if your {username}.ini le contains the option Reconnect=yes (so that a lost connection will restart 20 seconds after
disconnection) and you sign o of the thin client, then the Reconnect value will return to the original default value of no
(Reconnect=no) contained in the wnos.ini le—so that others who sign in can use their own user prole assuming the administrator
has not changed the default values in the wnos.ini le.
RDP connect options
Table 14. RDP connect options
Option Description
Autoconnect={0 to 99}
Default is 0.
Use for automatically starting a session after sign-on, if sign-on is
enabled.
The value of 0-99 is the delay in seconds before auto-starting the
session.
Colors={256, 32k, 64k or high, 16m, true}
Default is high.
Session color mode. For faster display performance, use 256 colors
for the session.
• 256 is 8-bits
• 32k is 15-bits
• 64k or high is 16-bits
• 16m is 24-bits
• true is 32-bits
NOTE:
• 64k is the same value as high.
• 16m — 24-bits over RDP is only supported by Windows
XP and Windows 2003 server. It is not supported by
Windows Server 2008 or newer.
• true — 32-bit remote connections are not supported by
Windows XP or Windows 2003 server. It requires
Windows Vista, Windows Server 2008, or newer with
RDP.
Command=start command
A string of commands to be executed after logging on to the
server. This entry is limited to 127 characters.
Console={no, yes}
Default is no.
Yes/no option to login to a session in Console mode.
NOTE:
If Console=yes is set behind the RDP connection, the
TimeZone redirection feature will be disabled.
98 Connect Parameter: Options