Setup Guide

Table 6. Connection Settings: wnos.ini files only (continued)
If set to full, the SSL connection needs to verify server
certificate. If it is untrusted, then drop the connection. If
set to warning, the SSL connection needs to verify server
certificate. If it is untrusted, you may still continue or drop
the connection. If set to low, the server certificate will not be
checked. The value will be persistent, and the default value of
the setting is default.
ClientCertificate —The option specifies the client
certificate file name during SSL connection between
Healthcast server and client.
INACTIVE=minutes
[NoSessionTimer=minutes]
[LockTimer=seconds]
Default is 0. There is no Idle timeout. The range is 0 minutes
to 480 minutes.If the value given is bigger than 480, 480 is set
instead. If the value given is smaller than 0, 0 is set instead.
When the system idle is time out in the configured minutes,
the system will automatically sign off, reboot or shutdown
which are based on the setting of AutoSignoff.
NoSessionTimer— The parameter NoSessionTimer has the
same range as INACTIVE and it is valid only if INACTIVE
value is not 0. If there is a session use the value of Inactive,
otherwise use the value of NoSessionTimer, if NoSessionTimer
is configured.
If AutoSignoff=yes Shutdown=yes is configured, then this
statement can work before signon.
If AutoSignoff=yes Reboot=yes is configured, this statement
can work before signon.
LockTimer—If the parameter LockTimer is set, the terminal
is locked and the system idle is timeout in the configured
seconds; System will automatically sign off, reboot or
shutdown based on the setting of AutoSignoff.
LongApplicationName={no, yes}
Default is no.
Yes/no option to display all 38 characters in a desktop icon
name. If LongApplicationName=no, then icons will display up
to 19 characters; any over 19 characters and the last three
characters will be “…”.
MaxVNCD={0, 1}
[VNCD_8bits={yes,no}]
[VNCD_Zlib={yes, no}]
Default is 0.
Option to enable VNC shadowing. Default value is 0 means
VNC shadowing is disabled. Set to 1 to enable shadowing.
NOTE:
Only one VNC client session is allowed and a password is
required.
See also VNCPrompt in Connection Settings: wnos.ini files,
{username} INI, and $MAC INI Files to enable a VNC
shadowing prompt to a user.
See also VncPassword in Connection Settings: wnos.ini files
only to specify a string of up to 8 characters as the password
used for shadowing.
VNCD_8bits — Default is yes. Yes/no option to force the
VNC server to send out images with 8-bits-per-pixel; if set
to no, the VNC server will send out images with the current
system color depth.
VNCD_Zlib — Default is no. Yes/no option to allow the VNC
server to send data with Zlib compression.
Parameters for wnos INI files only 27