Setup Guide

Table 6. Connection Settings: wnos.ini files only (continued)
[DHCPinform={yes, no}]
[DNSLookup={yes, no}]
[QuickMode={yes, no}]
[Discover={
yes, no}]
[SecurityMode={default, full, warning, low}]
If RapportDisable=no, the Rapport agent is enabled and you
can discover the WDM server by the following ways:
1. The DHCP option tag values received from standard or
WDM proxy DHCP service for vendor class RTIAgent
2. DNS service location record "_wdmserver._tcp"
3. DNS host name lookup "wdmserver"
If RapportDisable=no, set DHCPinform=yes to perform the
WDM server discovery as mentioned in number 1; set
DNSLookup=yes to perform the WDM server discovery as
mentiomned in number 2 and 3.
If QuickMode=yes is specified, rapport agent will not block
any other process during ThinOS boot up, and boot time of
ThinOS will speed up.
NOTE: If file server is changed by WDM server, device
will reboot automatically to make sure all settings from
WDM server take effect. Default is yes.
Discover— If Discover=yes is specified, rapport discovers
the WDM server information from DHCP option tag, DNS
service location record and DNS host name. If the WDM
server is discovered, the WDM server User Interface (UI) is
protected on the device. The default value is yes.
SecurityMode specifies the SSL certification validation
policy. If set to default, SecurityPolicy setting is applied.
If set to full, the SSL connection needs to verify server
certificate. If it is untrusted, drop the connection.
If set to warning, the SSL connection needs to verify server
certificate. If it is untrusted, it is up to you to continue or drop
the connection.
If set to low, the server certificate is not checked. The value is
persistent, and the default value of the setting is default.
If the settings are factory default or if you are upgrading to
ThinOS 8.3 for the first time, the value is temporarily set to
low. After loading any INI, it goes to Default value.
RapportServer=server_list
[Retry=]
NOTE:
DISCONTINUED. DO NOT USE. Use WDMServer
parameter, see WDMServer=<server_list> in Connection
Settings for wnos.ini Files Only.
Reboot | shutdown={no, yes} Time=hh:mm
[-hh:mm]
[Wday={Sunday, Monday, Tuesday, Wednesday, Thursday,
Friday, Saturday}]
[Idle=minutes]
Reboot — Yes/no option to enable automatic daily reboot of
all ThinOS devices.
Time — Specifies the time to reboot and must be in a 24-
hour format. For example: Reboot=Yes Time=17:30 will reboot
all ThinOS devices at 5:30 P.M. daily.
If you set time as hh:mm-hh:mm, a random time during the
configured time period is selected.
Wday— The option Wday specifies the week day of
scheduled reboot.
Idle— The option Idle specifies the idle minutes. After the
scheduled reboot time is reached, the unit reboots, if there is
no session or the terminal is idle for specified idle minutes. If
the session is still active, the reboot is delayed till the idle time
is reached or log off the sessions.
32 Parameters for wnos INI files only