Setup Guide

Table 6. Connection Settings: wnos.ini files only (continued)
CACertHash—This is the hash value used to verify
certificate authority's certificate. Client will not issue a
certificate request to a SCEP server and cannot pass
certificate chain checking through a valid certificate authority.
EnrollPwd or EnrollPwdEnc—These keywords are used to
set the enrollment password from a SCEP administrator.
EnrollPwd is the plain-text enrollment password and
EnrollPwdEnc is the encrypted form of the same enrollment
password. Use only one of these two fields to set the used
enrollment password.
As a substitute of using EnrollPwd or EnrollPwdEnc to
directly specify an enrollment password, client allows using
a SCEP administrator's credential to automatically get an
enrollment password from a Windows SCEP server. In this
case, the ScepUser, ScepUserDomain, ScepUserPwd (or
ScepUserPwdEnc, in encrypted form instead of plan-text)
are used to specify the SCEP administrator's credential,
and ScepAdminUrl must be set correctly to specify the
corresponding SCEP admin web page's URL. If neither
EnrollPwd nor EnrollPwdEnc is set, client will try to use
these set of settings to automatically get an enrollment
password and then use that password to request a certificate.
If communication security is necessary in your environment
during this phase, please add https:// as the prefix for
ScepAdminUrl to use HTTPS instead of the default HTTP
protocol.
Use ScepAutoEnroll=no AutoRenew=yes to only enable
SCEP auto renew; all other parameters are not needed if
ScepAutoEnroll is set to no.
NOTE:
SCEP server’s URL must be an HTTP link. Do not
add protocol prefix to RequestURL and ScepAdminURL.
SelectServerList={PNA, VDI}
[Default=default_desc]
list of servers {Server1; Server2; ...ServerN}
Allows users to select one PNA or VDI server during logon. For
server use the format:
description = <server’s description> host = <server’s
url> [ <options>]
NOTE: There must be “description” and “host” key words
on each server.
For PNA server options, use the options of the PnliteServer
parameter in Connection Settings: wnos.ini files, {username}
INI, and $MAC INI Files.
PNA example:
SelectServerList=PNA; Default=test3;
description = test1; host
= 192.168.0.10; autoconnectlist
=*; reconnectfrombutton=0; description
= test2; host = HostName2.wyse.com;
TimeOut=200; descriprion = test3 host =
https://server3.wyse.com
For a VDI server: If you want to use a VDI broker, specify
ConnectionBroker in wnos.ini. Otherwise the VDI broker’s type
is default.
34 Parameters for wnos INI files only