Setup Guide

Table 8. Peripheral Settings for wnos.ini Files, {username} INI, and $MAC INI files (continued)
Due to processing power requirements, rotate is not
recommended and supported on the C class platforms at
this time.
NOTE:
The Screen parameter must be placed before the
Resolution parameter. For example:
screen=1 resolution=1280x1024
refresh=60 rotate=none
*Screen={1, 2}
Default is 1.
Screen — Specifies the monitor for the Resolution
parameter. You can configure each monitor with its own
resolution; the specific monitor is set with the Screen= option.
NOTE:
The Screen parameter must be placed before the
Resolution parameter. For example:
screen=1 resolution=1280x1024
refresh=60 rotate=none
Connection Settings for wnos.ini files, {username}
INI, and $MAC INI files
The following table contains the parameters (and their options) used for configuring connection settings.
Table 9. Connection Settings: wnos.ini files, {username} INI, and $MAC INI files
Parameter
* Global overrides identically-named user profile
** After sign off, user profile returns to global value
Description
**AltCacheDisable={no, yes}
Default is no.
Yes/no option to disable the new cache mechanism allowing
more memory to be available to a user. This is developed with
Citrix Presentation Server 4.0 and Windows Server. If set to
no, the new cache mechanism is enabled.
**Alternate={no, yes}
Default is no.
Yes/no option to use an alternate IP address returned from an
ICA master browser to get through firewalls. This setting in a
wnos.ini file will be saved into NVRAM if EnableLocal=yes is
set in the wnos.ini file.
AutoDetectNetwork={yes, no}
RDP Only.
Default is yes.
Yes/no option to enable RDP auto detect network feature.
When this option is set to yes the Optimize for low speed
link and the Desktop Experience options are disable by
default.
66 Parameters for wnos INI, {username} INI, and $MAC INI files