Setup Guide

Table 9. Connection Settings: wnos.ini files, {username} INI, and $MAC INI files (continued)
DisableEcho — If DisableEcho=yes, the system will not
reflect the ICMP echo (8) request. In this case, the unit
cannot be pinged.
**LowBand={no, yes}
Default is no.
Yes/no option to enable optimization for low speed
connections, such as reducing audio quality or decreasing
protocol-specific cache size or both.
This setting in a wnos.ini file will be saved into NVRAM, if
EnableLocal=yes is set in the wnos.ini file.
MMRCodecConfig=AUDIO
[disableac3={no, yes}]
[disablempeg={
no, yes}]
[disablewma1={no, yes}]
[disablewma2={no, yes}]
[disablewma3={no, yes}]
[disablemp3={
no, yes}]
[disablepcm={no, yes}]
MMRCodecConfig — Only for platforms with TCX
Multimedia. Specifies the audio to allow the disabling of the
various codec options when playing audio.
disableac3 — Default is no. Yes/no option to disable the ac3
codec when playing audio.
disablempeg — Default is no. Yes/no option to disable the
mpeg codec when playing audio.
disablewma1 — Default is no. Yes/no option to disable the
wma1 codec when playing audio.
disablewma2 — Default is no. Yes/no option to disable the
wma2 codec when playing audio.
disablewma3 — Default is no. Yes/no option to disable the
wma3 codec when playing audio.
disablemp3 — Default is no. Yes/no option to disable the
mp3 codec when playing audio.
disablepcm — Default is no. Yes/no option to disable the
pcm codec when playing audio.
MMRCodecConfig=VIDEO
[disablempeg1={no, yes}]
[disablempeg2={no,
yes}] [disablejpeg={no, yes}]
[disablewmv1={no, yes}]
[disablewmv2={no, yes}]
[disablewmv3={no, yes}]
MMRCodecConfig — Only for platforms with TCX
Multimedia. Specifies the video to allow the disabling of the
various codec options when playing video.
disablempeg1 — Default is no. Yes/no option to disable the
mpeg1 codec when playing video.
disablempeg2 — Default is yes. Yes/no option to disable the
mpeg2 codec when playing video.
disablejpeg — Default is no. Yes/no option to disable the
jpeg codec when playing video.
disablewmv1 — Default is no. Yes/no option to disable the
wmv1 codec when playing video.
disablewmv2 — Default is no. Yes/no option to disable the
wmv2 codec when playing video.
disablewmv3 — Default is no. Yes/no option to disable the
wmv3 codec when playing video.
**NoReducer={no, yes}
Default is no — Enables compression.
Yes/no option to turn off compression. To turn off
compression, enter yes. Used here this parameter is a global
statement for all connections. It sets the default value of
NoReducer.
NOTE:
74 Parameters for wnos INI, {username} INI, and $MAC INI files