Setup Guide

Table 9. Connection Settings: wnos.ini files, {username} INI, and $MAC INI files (continued)
[groupname=name2] groupname — The group name is used to identify the group
including the directory and file name. If not defined, the
description will become the group name.
The Default option following "SelectGroup=yes" can specify
the default group. The value is one of group description
defined after that. After you select another group and sign
off, this default group will be selected.
If default option is not specified, the last selected group will
be selected in the next sign on.
For example:
SelectGroup=yes \
default="Sus team" \
description="Dev team" groupname=dev \
description="Sus team" \
description="SQA team" groupname=sqa \
description="guest"
Group 1: Description="Dev team" groupname=dev
The file \wnos\ini\dev\dev.ini must be created in the file
server. In the dev.ini, the broker, domain list, or connections
can be defined for the dev team.
Group 2: .Description="Sus team"
The file \wnos\ini\Sus team\Sus team.ini must be created in
the file server. In the Sus team.ini, the broker, broker list, or
connections can be defined for the Sus team.
Group3...4...n...and so on.
After a user selects a group, the system will load the
group ini file first, and then load the \wnos\ini\{group_name}
\username.ini. If the username.ini in the group directory is
not found, it will attempt to load \wnos\ini\username.ini as
before.
Because the group list may define different brokers,
the SelectServerList statement will be invalid if set
SelectGroup=yes.
Serial={
COM1, COM2, COM3, COM4}
[Baud={1200, 2400, 4800, 9600, 19200,
38400, 57600, 115200}]
[Parity={None, Even, Odd}]
[Stop={1, 1.5, 2}]
[Size={5, 6, 7, 8}]
[Flow={None, XON/XOFF, CTS/RTS, Both}]
[Touch={
no, yes}]
[Touch_XYReverse={no, yes}]
[Touch_type={
elo, microtouch, fastpoint}]
Serial — Default is COM1. Specifies the local serial ports
configuration.
Baud — Specifies the local serial port baud rate.
Parity — Specifies the local serial port parity.
Stop — Specifies the local serial port stop.
Size — Specifies the local serial port size.
Flow — Specifies the local serial port flow.
Touch — Default is no. Yes/no option to denote that a serial
touch screen is attached.
Touch_XYReverse — Default is no. Yes/no option to denote
a reversal of the X and Y coordinates which are needed for
some touch screens.
Touch_type — Default is elo. Specifies the type of
touchscreen being used.
NOTE: Options must be specified in the order
shown.9035366678
80 Parameters for wnos INI, {username} INI, and $MAC INI files