Setup Guide

Table 9. Connection Settings: wnos.ini files, {username} INI, and $MAC INI files (continued)
Resolution — Default is default. Specifies the session
resolution. For example, 640 x 480 and other supported
resolutions.
Default will set the resolution to the native resolution of the
monitor. Setting the resolution to a value smaller than the
native resolution of the monitor, will allow the session in
Windowed mode. The resolution value cannot be higher than
the native resolution.
DisableResetVM — Default is no. Set DisableResetVM=yes
to disable Reset VM function. As default, this function is
controlled by the server side is enabled including VMware
View or Citrix PNA.
WyseVDAServerPort — Sets Wyse VDA Server Port
for a ThinOS VDA client. The default port is 3471. The
port range must be from 1029 to 40000. For example,
WyseVDAServerPort=3000, sets VDA server port to 3000 and
the client will connect to the VDA server using this port.
FontSmoothing — Default is yes. Set no to disable font
smoothing.
AutoConnect — Default is yes. Set no to disable auto
connect function.
MultiMonitor — Default is yes. Sets a multiple monitor
layout. Set MultiMonitor=no to disable multiple monitor layout
function. The session has the same desktop width and
height with local virtual desktop size, spanning across multiple
monitors, if necessary.
EnableImprivataVC— Default is yes. If set to no, the
Imprivata Virtual Channel is disabled. The user can use vusb
redirect instead of Imprivata Virtual Channel mode to use the
Rfideas or finger print device in session as server side remote
device.
[Locale=LocaleID]— Set Locale=LocaleID to set Locale in
session for localization configuration to work. For information
about LocaleID, refer to link msdn.microsoft.com/en-us/
library/windows/desktop/dd318693(v=vs.85).aspx.
SessionLogoffTimeout—Setting SessionLogoffTimeout
value forces all sessions to logoff when user signs off from
the broker. The default value is 0 which retains the same
behavior as before, and also disconnects the sessions. If
you set a value, for example 30 seconds, broker sign-off
waits for 30 seconds for all sessions to finish logoff, then,
automatically session logs off. Broker sign-off will continue.
During the waiting process, one notice prompts for user to
check whether the session stops working if something is
not saved. This feature currently supports Citrix Xen broker
sessions and View Broker sessions only.
GroupSession=yes— Set to enable the function of grouping
sessions and the menu item of Group Sessions is checked
when you right click on the desktop. The default value is no
and the original state of Group Sessions is unchecked.
**SessionConfig=ICA
[desktopmode={fullscreen, window}]
[mapdisksunderz]: DISCONTINUED. DO NOT USE.
[TosIpPrecedence={0–5}]
SessionConfig — Specifies the ICA default settings of the
optional connection parameters for all ICA sessions.
desktopmode — Default is fullscreen. Specifies the display
mode of an ICA published desktop when using an ICA
PNAgent logon; the default is fullscreen mode for a PNA
desktop application.
82 Parameters for wnos INI, {username} INI, and $MAC INI files