Administrator Guide
Table Of Contents
- Dell Wyse ThinLinux 1.0.3 INI Guide
- Introduction
- Getting Started: Learning INI File Basics
- General Settings Parameter Options
- Peripheral Settings Parameter Options
- Connection Settings Parameter Options
- Custom GNOME Settings Parameter Options
- Connect Parameter Options
- Printer Parameters Option
- TimeZone Parameter: Values
- Keyboard.layouts Parameter: Values
![](/manual/dell/wyse-5060-thin-client/5-4-3-2-1-administrator-guide-english/images/img-20.png)
Parameter Description
Default: Set to system default by using <default> in INI le.
NOTE: On default check system registry
Mouse.MotionAccleration is 2 and MotionThreshold value is 1
Mouse.MouseSwap={yes, no} It swaps left and right handed mouse buttons.
no: Is left handed mouse
Mouse.DoubleClick={100 to 1000, and <default>} Double click species the length of double click in milliseconds.
100 - fastest
1000 - slowest
NetworkPrinter= < LPD> For Example: NetworkPrinter=LPD <Option>
For parameter options used in the command line, see
NetworkPrinter in Printer Parameters Options.
Keyboard.Repeat={true, false} Default is true. Keyboard repeat is enabled. If you press key, it will be
repeated.
Keyboard.RepeatDelay={<default>, 0 to 7 or 100 to 2000} Initial Key Repeat Delay is 100 to 2000 according to new SLES
standard. For backward compatibility 0 is minimum 7 is maximum.
This setting is valid only when Keyboard.Repeat is enabled (true).
Keyboard.RepeatRate={<default>, 0 to 2 or 9 to 2000} 9 is fast and 2000 is slowest according to new SLES standard. For
backward compatibility Key Repeat Interval, delay between repeats.
0 is slow
1 is medium
2 is fast
This setting is valid only when Keyboard.Repeat is enabled (true).
Keyboard.layouts=<value of Keyboard.layouts> See Keyboard.layouts Parameter: Values.
For example: Keyboard.layouts= ara (for Arabic(South Sudan))
Keyboard.layouts= ru (for Russia)
Printer={USB <options> or URI} Species the USB for local USB printer. Only one USB printer can be
supported. The USB printer will not be congured if it is not
attached.
For other types of printers, URI needs to be provided, such as
parallel:/dev/lpunit or serial:/dev/ttySunit?baud=speed.
For parameter options used in the command line, see Printer in
Printer Parameters Options.
PrinterURI=<uri> For Example:
PrinterURI=[ipp://[user[:password]@host[:port]/path
[http://[user[:password]@host[:port]/path
20