Administrator Guide

Options Description
JPEG Quality levels are,
0 = Low and 9 = High.
LocalCopy= {yes, no} Default is no.
LocalCopy saves the connection in the local permanent registry,
if LocalCopy parameter is set to yes.
Password=<base-64 encoded password> Species the password required to log in to the VNC server.
Either a base-64 encoded login password or a variable can be
used.
password — base-64 encoded login password
$SN — Serial number
$MAC — MAC address
$IP — IP Address
$DN — Sign-on domain name
$UN — Sign-on name
$PW — Sign-on password
$TN — Terminal name
NOTE:
The VNC server password is not encrypted; not specifying it is
recommended. The user is prompted to enter the password
when the connection is made. This VNC server password
directive never starts a line, so it can be distinguished from the
thin client user sign-on password which starts a line.
Shared= {yes, no}
Default is no
When a connection is shared, other viewers are not
disconnected when a new connection is established.
ViewOnly= {yes, no} Default is no.
VNC connection will be created in view only mode when this
parameter is set to Yes, which means mouse and keyboard input
to the remote machine will be disabled.
Ericom PowerTerm Connect Options
The following table contains the supported options you can use for Ericom PowerTerm Connect, where default values are in bold:
Example:
CONNECT=Ericom_Powerterm \
Description="Ericom_Test" \
Host=192.168.0.2 \
53