Administrator Guide

a. Enter the HTTP proxy port number or HTTPS proxy port number, User name and Password in the respective elds.

However, credential pass through ($UN/$PW) is not recommended because it starts before user sign on.

Wyse Management Suite uses both HTTP/HTTPS and MQTT protocols to communicate with the WMS/MQTT server.

However, the HTTP proxy cannot redirect TCP packages to the MQTT server which requires a SOCKS5 proxy server. If

there is only HTTP server available, then the real-time command that requires MQTT does not work.

HTTP/HTTPS proxy default port is 808, and SOCKS5 proxy default port is 1080.

b. Select the Use the rst proxy server for all protocols check box to allow all the protocols to use the same server in the

HTTP Proxy elds. Both HTTP and HTTPS proxy use the same host and port, and SOCKS5 proxy agent uses HTTP host

with default Socks5 port (1080).

If SOCKS5 proxy is congured, then WMS proxy uses the SOCKS5 only. If SOCKS5 is not congured, then WMS proxy

searches for alternative protocols, for example, HTTP in the conguration.

c. Specify the supported applications as Wyse Management Suite, FR and RTME separated by a semicolon in the Apply

proxy server on eld.

3. Click OK to save the settings.

User scenario

1. Congure correct proxy server host and port.

2. Congure the user credentials according to the proxy server settings.

On system restart, the client checks in to the Wyse Management Suite server through SOCKS5 proxy server. MQTT

connection is established through SOCKS5 proxy server. Real-time commands work ne through SOCKS5 proxy server.

3. Connect to the Citrix desktop, congure proxy in internet options of the browser, and then playback HDX FR through the

HTTP/HTTPS proxy authentication.