Setup Guide
Table Of Contents
- Dell Wyse ThinOS Version 8.6 INI Reference Guide
- Contents
- Introduction
- Getting Started: Learning INI File Basics
- Parameters for wnos INI files only
- Parameters for wnos INI, {username} INI, and $MAC INI files
- Connect Parameter: Options
- TimeZone Parameter: Values
- Best Practices: Troubleshooting and Deployment Examples
Table 5. Connection Settings: wnos.ini files only (continued)
Parameter Description
[RequireSmartCard={yes or force, optional,
no}]
[SCRemovalBehavior= {none or -1, logoff or 0,
lock or 1, killsessions or 2}]
[SaveLastDomainUser={yes, no, user,
domain}]
[DefaultINI=filename]
[IconGroupStyle={default, folder}]
[IconGroupLayout={
Vertical, Horizontal}]
[PasswordVariables={yes, no}
[LockTerminal={
yes, no}]
[ExpireTime={0, 1 - 480}]
[UnlockRefresh={yes, no}]
[SCShowCNName={yes,no}]
[SCSecurePINEntry={no, yes}]
[AutoConnectTimeout={10–300}]
[DisableEditDomain={yes, no}]
[AdGroupPrefix=adgrpnameprefix]
[ClearUser={yes, no}]
[DisableSignoff={yes,
no}]
[SFZeroButtons={yes, no}]
[SignonStatusColor=“rrr ggg bbb”]
[SCHidePINLeft={yes, no}]
[BitmapsMap={yes,no}]
[EnableMessage={yes, no}]
EnableScSSPR—Default is yes. This parameter hides the smart card pin
change icon on setting the user INI to EnableScSSPR=no. Ensure that the
SignOn parameter is set to yes.
EnableScPinChange—Default is yes. If the user INI is set to
EnableScPinChange=no, then the smart card pin change radio button is
not displayed. Ensure that the SignOn parameter is set to yes.
DisableGuest — Default is no. Yes/no option to disable the guest sign-on.
DisablePassword — Default is no. Yes/no option to disable the password
text box and password check box in the Sign-on dialog box.
LastUserName — Default is no. Yes/no option to display the last sign-on
username after the user logs off.
RequireSmartCard — Default is optional. If optional keyword is set to yes
or force, only smartcard authentication is allowed. If set to no, smartcard
authentication is disabled. If the value is set to optional, smartcard
authentication is optional.
SCRemovalBehavior — This parameter specifies the thin client behavior
when a smart card is removed. The default value is 0.
● none or -1 — If the smart card is removed then the client has no action.
Whether the session can be used or not is dependent on the server policy.
● logoff or 0 — System logs off.
● lock or 1 — System is locked and can be unlocked only when the same
certificate is used with smart card.
● killsessions or 2 — This option can be used with the AutoSignoff
parameter.
SaveLastDomainUser — Yes/no option to save the username and domain
into NVRAM once signon is successful. On next reboot, the username and
domain saved in the NVRAM will be displayed in signon server as the default
username and domain if no DefaultUser is set in the wnos.ini file.
The size of username/domain is limited to 32 characters, and if larger than
32, it will first be truncated and then saved into NVRAM.
DefaultINI — The optional DefaultINI configures a file name which is in the
default folder of the username ini files. If the {username}.ini is not found, this
file will be loaded as default.
IconGroupStyle — The optional IconGroupStyle configures the icon group
style on the desktop. PNAgent published applications can be configured with
the client folder in the PNA server.
If set IconGroupStyle=folder, the PNAgent published applications which are
specified to display on the desktop will display with the folder.
After clicking the folder icon, the subfolder or applications in this folder will
display on the desktop. In this case, there is an Up to 1 Level icon on top.
Clicking the icon will display the up one level folder contents.
IconGroupLayout — Default is vertical. Configures the direction of the
icongroup on the desktop.
PasswordVariables — Default is no. Yes/no option to support variable
mapping ($TN, $UN etc) for a password.
Continued from the previous table...
LockTerminal — Default is yes. Yes/no option to lock the terminal. If set
LockTerminal=no, the function of locking terminal is disabled. It disables
the Lock Terminal from a Right Click on the desktop or from clicking the
Shutdown option > Lock Terminal. It also disables lock terminal even if set
ScreenSaver=minutes; LockTerminal=yes.
Parameters for wnos INI files only 35