Setup Guide

Table 8. Connection Settings: wnos.ini files, {username} INI, and $MAC INI files (continued)
Parameter
* Global overrides identically-named user profile
** After sign off, user profile returns to global value
Description
OneSignServer=onesign_server
[DisableBeep={no, yes}
[KioskMode={
no, yes}]
[EnableFUS={no, yes}]
[TapToLock={0, 1, 2}]
[EnableWindowAuthentication={yes,no}]
[AutoAccess={VMW,XD,XA}]
[NetBIOSDomainName={
no, yes}]
[OneSignTimeout={0 to 30}]
Specifies a list of host names or IP addresses with optional
TCP port number or URLs of Imprivata OneSign servers.
NOTE: An https protocol must be used.
OneSign virtual desktop access offers a seamless
authentication experience and can be combined with single
sign-on for no click access to desktops and applications in a
virtual desktop environment.
The following inputs are acceptable values:
https://ip
or
https://FQDN
DisableBeep — Default is no. Yes/no option to set the
Rfideas reader to mute when a card is tapped.
KisokMode — Default is no. Yes/no option to allow the
OneSign user to share the client desktop.
EnableFUS — Default is no. Yes/no option to set the Citrix
client to remain running when switch users.
TaptoLock — Default is 2. Only active when KioskMode=yes.
Specifies tap to lock.
If TapToLock=0, then tap a card to lock terminal is disabled.
If TapToLock=1 (Tap to lock), then use the proximity card to
lock the terminal.
If TapToLock=2 (Tap over), then lock the terminal and log in a
different user.
EnableWindowAuthentication — Default is yes. Yes/no
option to sign-on with the user’s Windows credentials to pre-
defined broker if the OneSign sign-on fails.
AutoAccess — Specifies the corresponding type of broker to
automatically start. If not defined, the broker type is obtained
from the Imprivata Server setting of the computer and user
policy. If none of them is defined, then the first available
broker server from the Imprivata server is started.
NOTE:
AutoAccess can be set in [username].ini and wnos.ini,
however, the wnos.ini, has priority over [username].ini.
NetBIOSDomainName — Default is no. Yes/no option to
enable the authentication to the broker server using the
NetBIOS domain name. If set to yes, the Imprivata domain
list will show NetBIOS domain name and the card user will
authenticate to the broker server using the NetBIOS domain.
OneSignTimeout—This option sets the timeout for OneSign
login window. The value range is 0 to 30 seconds. The default
value is 20 seconds. If the value is set to 0, timeout is disabled
and the OneSign window stays on the screen.
PnliteServer=List of {IP address, DNS names, or URLs}
[ReconnectAtLogon={0, 1, 2}]
PnliteServer — Specifies the list of IP addresses or host
names with optional TCP port number or URLs of PNAgent/
PNLite servers. The list is empty by default.
Parameters for wnos INI, {username} INI, and $MAC INI files 81