Setup Guide
Table Of Contents
- Dell Wyse ThinOS Version 8.6 INI Reference Guide
- Contents
- Introduction
- Getting Started: Learning INI File Basics
- Parameters for wnos INI files only
- Parameters for wnos INI, {username} INI, and $MAC INI files
- Connect Parameter: Options
- TimeZone Parameter: Values
- Best Practices: Troubleshooting and Deployment Examples
Table 8. Connection Settings: wnos.ini files, {username} INI, and $MAC INI files (continued)
Parameter
* Global overrides identically-named user profile
** After sign off, user profile returns to global value
Description
Group 2: .Description="Sus team"
The file \wnos\ini\Sus team\Sus team.ini must be created in
the file server. In the Sus team.ini, the broker, broker list, or
connections can be defined for the Sus team.
Group3...4...n...and so on.
After a user selects a group, the system will load the
group ini file first, and then load the \wnos\ini\{group_name}
\username.ini. If the username.ini in the group directory is
not found, it will attempt to load \wnos\ini\username.ini as
before.
Because the group list may define different brokers,
the SelectServerList statement will be invalid if set
SelectGroup=yes.
Serial={
COM1, COM2, COM3, COM4}
[Baud={1200, 2400, 4800, 9600, 19200,
38400, 57600, 115200}]
[Parity={None, Even, Odd}]
[Stop={1, 1.5, 2}]
[Size={5, 6, 7, 8}]
[Flow={None, XON/XOFF, CTS/RTS, Both}]
[Touch={
no, yes}]
[Touch_XYReverse={no, yes}]
[Touch_type={
elo, microtouch, fastpoint}]
Serial — Default is COM1. Specifies the local serial ports
configuration.
Baud — Specifies the local serial port baud rate.
Parity — Specifies the local serial port parity.
Stop — Specifies the local serial port stop.
Size — Specifies the local serial port size.
Flow — Specifies the local serial port flow.
Touch — Default is no. Yes/no option to denote that a serial
touch screen is attached.
Touch_XYReverse — Default is no. Yes/no option to denote
a reversal of the X and Y coordinates which are needed for
some touch screens.
Touch_type — Default is elo. Specifies the type of
touchscreen being used.
NOTE: Options must be specified in the order shown.
SessionConfig=ALL
[unmapprinters={no, yes}]
[unmapserials={
no, yes}]
[smartcards={no, yes}]
[mapdisks={no, yes}]
[disablesound={no, yes, 2}]
[unmapusb={
no, yes}]
[DisksReadOnly={no, yes}]
[MouseQueueTimer={0–99}]
[WyseVDA={
no, yes}]
[WyseVDA_PortRange=startPort, endPort]
[UnmapClipboard={no, yes}]
[DefaultColor={0,1,2}]
[VUSB_DISKS={yes, no}]
SessionConfig — Specifies the default settings of the
optional connection parameters for all sessions.
unmapprinters — Default is no. Yes/no option to un-map
printers.
unmapserials — Default is no. Yes/no option to un-map
serials.
smartcards — Default is no. Yes/no option to use
smartcards.
mapdisks — Default is no. Yes/no option to map disks.
disablesound — Default is no. Yes/no option to disable
sound. If value is set to 2, the sound at remote computer is
disabled.
unmapusb — Default is no. Yes/no option to un-map USBs.
DisksReadOnly — Default is no. Yes/no option to mount
mass storage disks as read-only.
Parameters for wnos INI, {username} INI, and $MAC INI files 87