Administrator Guide

Configuring ICA connections
To configure the ICA connections:
1. From the desktop menu, click System Setup, and then click Remote Connections.
The Remote Connections dialog box is displayed.
2. In the Broker Setup tab, from the drop-down list, select the Broker type as None.
3. Click ICA connection protocol, and click Configure.
The Default ICA dialog box is displayed.
NOTE: Default ICA is always used for direct connection to a published application and not for StoreFront or PNAgent.
4. Click the Connection tab.
To configure the ICA connections, do the following:
Figure 15. Default ICA
a. Server or Published Application—Select the type of connection to which the settings apply.
b. Connection Description—Enter the descriptive name that is to be displayed in the connection list (38 characters
maximum).
c. Browser Servers—Enter a delimited (comma or semicolon) list of IP addresses or DNS-registered names of ICA servers
that contain the master browsers list, or that can direct to another server that contains the list.
The master browsers list is generated automatically by a browsing program on one of the ICA servers (selected by
negotiation between servers). It is used to provide the information that is displayed in the Server Name or IP box. No
102
Configuring the connection brokers