Administrator Guide

Figure 31. Amazon WorkSpaces login window for servers that support MFA
If your server does not support MFA, use the following INI parameter:
ConnectionBroker=AWS Host=wsnrt+KQRQWM UseRegistrationCode=yes EnableMFA=no
Figure 32. Amazon WorkSpaces login window for servers that do not support MFA
● If you want to connect to AWS using the default PCoIP Gateway mode, enter the IP address/Hostname/FQDN of the
broker server in the Broker Server field.
NOTE:
Do not select the Connect via registration code check box if you are using the default PCoIP Gateway
mode.
4. In the Auto Connect List field, enter the name of the desktops that you want to launch automatically after logging in to the
respective broker. More than one desktop can be listed. Each desktop name is separated by a semicolon, and is case-
sensitive.
5. Select the preferred Security mode from the following options:
● Warning—This security mode requires FQDN address for domain certificate that is installed in PCM. If certificate is not
installed on the client, corresponding warning message is displayed for you to continue.
152
Configuring the connection brokers