Administrator Guide
● Fast User Switching
● Non-OneSign user VDI access
● Hotkey Disconnect
● Proximity card reader redirection
● Guided Question and Answer login
● Authenticate w/Password
● Authenticate w/Password + Password Change
● Authenticate w/Password + Password Change | New Password is Invalid
● Authenticate w/Proximity Card + Password
● Authenticate w/Proximity Card + Pin
● Authenticate w/Proximity Card + Pin | Pin not enrolled
● Authenticate w/Proximity Card Alone | Retrieve Password
● Retrieve User Identity Password
● Reset User Identity Password
● Update User Identity Password
● Enroll Proximity Card
● Lock/Unlock Terminal with Proximity CardLock/Unlock Terminal with Proximity Card
ThinOS supports latest Imprivata WebAPI version 5. It includes OneSign Objects (WebAPI v4) and Fingerprint Authentication
(WebAPI v5).
Configuring objects on Imprivata Server
Imprivata WebAPI is updated from version 4 to version 5. From earlier version, supports configuration objects are supported
that enables you to control different aspects of client behavior. The Imprivata WebAPI feature is available on OneSign server 4.9
and later versions. The Configuration objects control different aspects of the client behavior.
Use the following guidelines to configure the objects on Imprivata Server:
1. Configuring the General configuration object
a. On the Imprivata server, click Computer policy, and then click General tab.
b. Select the check box to allow users to shut down and restart workstation from lock screen.
NOTE: Display shutdown button and restarts commands to the user on the OneSign GINA.
The following configuration objects are supported on Imprivata server:
● Shutdown Allow
Configuring connectivity
59