Service Manual
Table Of Contents
- Managing Windows-based Dell Wyse Thin Clients using System Center Configuration Manager Administrator’s Guide
- Introduction
- Imaging Dell Wyse thin clients with System Center Configuration Manager (SCCM)
- Deploying operating system image by using Operating Systems Deployment (OSD)
- Prerequisites to deploy software applications
- Prerequisites to capture and deploy an operating system
- Creating software package for unattended installation
Figure 15. Boot image
NOTE:
You must include Ethernet/ SFP driver in the boot image. You can contact the Dell Wyse support team for the
respective driver.
9. Click Next.
10. On the Summary page, verify the details, and click Next.
The captured media or ISO is created.
11. After the installation is complete, click Close.
12. Extract and copy the ISO to a removable USB drive.
Capturing Windows image from reference system
To capture the Windows image from a reference system, do the following:
1. Plug in the prepared USB flash drive or CD/DVD to the reference thin client.
2. Open the USB pen drive or CD/DVD drive, and go to D:\SMS\Bin\i386.
3. Run the D:\SMS\Bin\i386\TSMBAutoRun.exe file.
The Image Capture Wizard is displayed.
4. On the Welcome to the Image Capture Wizard page, click Next.
18
Imaging Dell Wyse thin clients with System Center Configuration Manager (SCCM)