Users Guide
Table Of Contents
- Dell Wyse 5070 Thin Client User Guide
- Contents
- Welcome to Dell Wyse 5070 thin client
- Chassis overview
- Major components of your thin client
- Supported system peripherals for Wyse 5070 thin client
- Setting up the thin client
- Before working on your thin client
- After working on your thin client
- Removing and installing components
- Technical specifications
- Wyse 5070 thin client configuration on ThinOS
- Wyse 5070 thin client on ThinLinux
- Wyse 5070 thin client on Windows 10 IoT Enterprise
- BIOS overview
- Accessing thin client BIOS settings
- System Setup overview
- Boot Sequence
- Navigation keys
- General screen options
- System Configuration screen options
- Video screen option
- Security screen options
- Secure Boot screen options
- Performance screen options
- Power management screen options
- POST behavior screen options
- Wireless screen option
- Virtualization support screen options
- Maintenance screen options
- System Logs screen option
- Troubleshooting your system
Figure 17. Connect CAC cable
4. Follow the procedure in After working on your thin client.
Postrequisite
Replace the Chassis cover.
Memory module
A memory module is a circuit board that contains DRAM-integrated circuits that are installed into the memory slot on a system
board.
Remove the memory module
Prerequisites
1. Remove the chassis cover.
2. Remove the CAC reader.
Procedure
1. Follow the procedure in Before working on your thin client.
28
Removing and installing components