Users Guide
Table Of Contents
- Dell Wyse 5070 Thin Client User Guide
- Contents
- Welcome to Dell Wyse 5070 thin client
- Chassis overview
- Major components of your thin client
- Supported system peripherals for Wyse 5070 thin client
- Setting up the thin client
- Before working on your thin client
- After working on your thin client
- Removing and installing components
- Technical specifications
- Wyse 5070 thin client configuration on ThinOS
- Wyse 5070 thin client on ThinLinux
- Wyse 5070 thin client on Windows 10 IoT Enterprise
- BIOS overview
- Accessing thin client BIOS settings
- System Setup overview
- Boot Sequence
- Navigation keys
- General screen options
- System Configuration screen options
- Video screen option
- Security screen options
- Secure Boot screen options
- Performance screen options
- Power management screen options
- POST behavior screen options
- Wireless screen option
- Virtualization support screen options
- Maintenance screen options
- System Logs screen option
- Troubleshooting your system
Table 7. Ports and connectors specifications (continued)
Feature Specification
Common Access Card reader Accepts 1.8 V, 3 V, and 5 V cards
Security
The section provides security options available for Wyse 5070 thin client:
● TPM chip onboard v2.0
● Chassis intrusion detection
● Kensington lock
● Pad lock
NOTE: The length of the Pad/Kensington lock is 1.54 cm (0.60 inch).
Battery specifications
The Wyse 5070 thin client supports the following coin-cell battery:
Table 8. Battery specifications
Feature Specification
Coin-cell battery 3 V CR2032 lithium coin-cell battery
NOTE:
● Do not ingest the battery, as it will cause chemical burn hazard.
● If the coin / button cell battery is swallowed, it can cause severe internal burns in just two hours, and can lead to death.
● Keep the new and used batteries away from children.
● If the battery compartment does not close securely, stop using the thin client and keep it away from children.
● If the batteries have been swallowed, seek medical attention immediately.
AC adapter specifications
This section describes the power adapter specifications of the thin client.
Table 9. AC adapter specifications
Feature Specification
Type 65 W and 90 W
Input voltage 100-240 VAC
Input current (maximum) 1.7 A (65 W)/1.5 A (90 W)
Input frequency 50-60 Hz
Output current 3.34 A (65 W)/4.62 A (90 W)
Rated output voltage 19.5 VDC
Temperature range (Operating) 0 ~ 40° C (32 ~ 104° F)
Temperature range (Non-Operating) -40 ~ 70° C (-40 ~ 158° F)
Technical specifications 35