Users Guide
Table Of Contents
- Dell Wyse 5070 Thin Client User Guide
- Contents
- Welcome to Dell Wyse 5070 thin client
- Chassis overview
- Major components of your thin client
- Supported system peripherals for Wyse 5070 thin client
- Setting up the thin client
- Before working on your thin client
- After working on your thin client
- Removing and installing components
- Technical specifications
- Wyse 5070 thin client configuration on ThinOS
- Wyse 5070 thin client on ThinLinux
- Wyse 5070 thin client on Windows 10 IoT Enterprise
- BIOS overview
- Accessing thin client BIOS settings
- System Setup overview
- Boot Sequence
- Navigation keys
- General screen options
- System Configuration screen options
- Video screen option
- Security screen options
- Secure Boot screen options
- Performance screen options
- Power management screen options
- POST behavior screen options
- Wireless screen option
- Virtualization support screen options
- Maintenance screen options
- System Logs screen option
- Troubleshooting your system
6. To enable the monitor On/Off option, click the ON/OFF button. This option allows you to turn off and turn on the
preferred monitor in a dual monitor configuration.
Setting the mouse preferences
By default, the Mouse screen is available in both User mode and Admin mode. Any changes made through the Mouse
preferences screen is saved and continued for the built-in thinuser.
Figure 22. Mouse Preferences
The Mouse setting page enables you to set the Mouse preferences.
1. Click Right or Left to set the primary button of the mouse.
2. Move the slider to the left to increase the speed of the pointer when double-clicked or move the slider to the right to
decrease the length of double-clicked.
3. Move the slider to the left to increase the speed of the mouse pointer or move the slider to the right to decrease the speed
of the mouse pointer.
4. Click Save to save your changes.
Configuring the printer settings
By default, the Printers screen is available only in Admin mode. On the Printer setting page, click the printer icon to start the
gnome-control-center printer.
46
Wyse 5070 thin client on ThinLinux