Users Guide
Table Of Contents
- Dell Wyse 5070 Thin Client User Guide
- Contents
- Welcome to Dell Wyse 5070 thin client
- Chassis overview
- Major components of your thin client
- Supported system peripherals for Wyse 5070 thin client
- Setting up the thin client
- Before working on your thin client
- After working on your thin client
- Removing and installing components
- Technical specifications
- Wyse 5070 thin client configuration on ThinOS
- Wyse 5070 thin client on ThinLinux
- Wyse 5070 thin client on Windows 10 IoT Enterprise
- BIOS overview
- Accessing thin client BIOS settings
- System Setup overview
- Boot Sequence
- Navigation keys
- General screen options
- System Configuration screen options
- Video screen option
- Security screen options
- Secure Boot screen options
- Performance screen options
- Power management screen options
- POST behavior screen options
- Wireless screen option
- Virtualization support screen options
- Maintenance screen options
- System Logs screen option
- Troubleshooting your system
Denotes the audio output to the active speaker. Connect peripherals such as external storage devices, display, and printers.
Provides data transfer speeds up to 10 Gbps.
8. Headset port
Connect headphones output, a headset (headphone and microphone combo), or speakers.
9. USB Type– C Port
Enables you to connect peripherals such as external storage devices, display, and printers. Provides data transfer speeds up
to 5 Gbps. It provides up to 5 V/3 A power output that enables faster charging.
10. USB 3.0 with Smart Power-on
Connect keyboard or monitor to wake up your thin client from off state.
11. USB 3.0 port
Connect peripherals such as storage devices and printers. Provides data transfer speeds up to 5 Gbps.
12. DisplayPort
Connect an external display or a projector.
13. DisplayPort without audio
Connect an external display or a projector. Video output only. No audio output from this port.
14. Network port
Connect an Ethernet (RJ45) cable from a router or a broadband modem for network or internet access. Two LEDs are for
activity and connection status and speed.
15. Power connector port
Connect a power cable to provide power to your thin client.
NOTE:
DP1 is natural output from SOC directly while additional circuitry is required in the path of DP2/DP3 in order to support
DP2/Type C mux and DP3/VGA mux. The additional circuitry consumes more power once the DP2 or DP3 is being used.
To maintain ENERGY STAR designation you should use DP1.
16. Wireless antenna
Connect antenna to extend the wireless connectivity of your thin client.
17. Pad lock
Apply pad lock to prevent unauthorized access to the hardware components of your thin client.
18. Kensington lock
Connect a security cable to prevent unauthorized movement of your thin client.
19. USB 3.0 port (3)
Connects peripherals such as storage devices and printers. Provides data transfer speeds up to 5 Gbps.
20. Power cable hook
Secures the power adapter cable of your thin client.
21. Expansion slot—Serial/RJ45/SFP/VGA
Connect RJ45/SFP/VGA/Serial to your thin client.
8
Chassis overview