Users Guide
Table Of Contents
- Dell Wyse 5070 Extended Thin Client User Guide
- Contents
- Welcome to Dell Wyse 5070 extended thin client
- Chassis overview
- Major components of your thin client
- Supported system peripherals for Wyse 5070 thin client
- Setting up the thin client
- Before working on your thin client
- After working on your thin client
- Removing and installing components
- Technical specifications
- Wyse 5070 thin client configuration on ThinOS
- Wyse 5070 thin client on ThinLinux
- Wyse 5070 thin client on Windows 10 IoT Enterprise
- BIOS overview
- Accessing thin client BIOS settings
- System Setup overview
- Boot Sequence
- Navigation keys
- General screen options
- System Configuration screen options
- Video screen option
- Security screen options
- Secure Boot screen options
- Performance screen options
- Power management screen options
- POST behavior screen options
- Wireless screen option
- Virtualization support screen options
- Maintenance screen options
- System Logs screen option
- Troubleshooting your system
Figure 12. Tighten the thumb screw
4. Follow the procedure in After working inside your thin client.
PCIe module
The PCIe module is a high-speed serial replacement of the older PCI/PCI-X bus. PCIe uses a shared parallel bus architecture, in
which the PCI host and all devices share a common set of address, data, and control lines.
Remove the PCIe module
Prerequisites
Remove the Chassis cover.
Procedure
1. Follow the procedure in Before working inside your thin client.
2. Hold both ends of the PCIe module and lift the module away from the thin client.
24
Removing and installing components