Setup Guide

Table 6. Connection Settings: wnos.ini files only (continued)
Parameter Description
This is a vendor-specific information. If ParseVendorInfo is set to no and the
DHCPVendorID is also used with this parameter, you must set
ParseVendorInfo=yes and then reboot the thin client twice. Maximum of 26
characters are allowed in a string.
DHCPVendorID=vendor
[ParseVendorInfo={no, yes}]
DHCPVendorID — Specifies the VendorID used for DHCP.
ParseVendorInfo — Default is yes. Yes/no option to specify whether or not
ThinOS will interpret DHCP option 43.
This is a vendor-specific information. If ParseVendorInfo is set to no and the
DHCPVendorID is also used with this parameter, you must set
ParseVendorInfo=yes and then reboot the thin client twice.
Maximum of 26 characters are allowed in a string.
DisableDomain={no, yes}
Default is no.
Yes/no option to disable the drop-down domain list in the PNAgent/PNLite
Sign-on dialog box.
DNSIPVersion={ipv4, ipv6}
[DNSServer=server_list]
[DNSDomain=dns_domain_url]
[Combined={yes,
no}]
Specifies the DNS server and domain. Default IP version is ipv4.
The DNS Server is an IP list separated by ; or ,. The maximum size of this list
is 16. For example: 10.200.5.53;192.168.100.1;192.168.200.8
NOTE: There is no space after the ;.
If Combined=yes, then the DNS server will combine the DNS server
configured by DHCP and the static one. DNS domain will use the value
configured by DHCP if static DNS domain is empty.
DNSTTL={0-3600}
Specifies the Time to Live (TTL) of DNS name caching; the default is from
DNS server settings.
NOTE:
If DNSTTL=0, the DNS hostname in a connection always queries the DNS
server to get the IP.
DomainList=List of NT domain names
[disable={yes/no}]
A list of domain names that will appear in the thin client Sign-on dialog box as
options to help users in selecting the domain to sign-on to PNAgent/PNLite
servers. Once specified, it is saved in non-volatile memory.
NOTE:
Be sure to enclose in quotation marks if spaces are included. For example:
DomainList=North_America, SQA, test-domain.
disable— If the value is set to yes, the domain field in sign-on window is
disabled.
Dualhead={no, yes}
[ManualOverride={no, yes}]
[Mainscreen={1, 2}]
[Orientation={
hort, vert}]
[Align={Top|Left, Center, Bottom|Right}]
[Taskbar={wholescreen, mainscreen}]
[MonitorAutoDetect={yes,no}]
[Swap={
no, yes}]
[EnsureDpIsOn ={yes, no}]
Default is no.
Dualhead — Yes/no option to support a dual-monitor display. Default no sets
monitors to mirror mode; yes sets monitors to span mode.
ManualOverride — Default is no. Yes/no option to allow the local client to
override display dualhead settings received from central configuration.
If reset to factory defaults, it will once again take server settings for
dualhead. This is helpful for scenarios where you have a mixture of dual head
and single head deployments.
For example:
24 Parameters for wnos INI files only